Jump to content
SAU Community

Recommended Posts

I was wondering if anyone would like to change the colour of the car to black, lower it, add blue neons and replace the wheels with the new given ones for me n post it back... oh n remove the shadow under the car and have it all on a white back ground :wavey: :looney:

thnk you too anyone who trys

Link to comment
https://www.sau.com.au/forums/topic/36286-help-with-photoshop/
Share on other sites

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

hey... i'd normally tell you to go ask someone in the computer art section but theres a thread under this one with the topic 'the answer to does my car suit this'... he's looking for a car to show people what he can do... i'm sure he'll gladly do it for you.... anthony :) :) :P :P

FOR A START BULLET-32, WHO THE HELL R U???

SOCK F**K U, U REALLY TICK ME OFF

N INASNT U **** UP N JUST WAIT FOR PICS, JUST BECAUSE IM 14 MEANS U CAN SHOVE THINGS BACK UP MY ASS OK, ATLEAST IM INTO THIS STUFF AT 14, GOD KNOWS WHAT UR SAD ASS WAS DOIN AT 14

and i think the v8 is a 308

n its a r34 gts, like i said i dont know who bullet-32 is

FOR A START BULLET-32, WHO THE HELL R U???

SOCK F**K U, U REALLY TICK ME OFF

N INASNT U **** UP N JUST WAIT FOR PICS, JUST BECAUSE IM 14 MEANS U CAN SHOVE THINGS BACK UP MY ASS OK, ATLEAST IM INTO THIS STUFF AT 14, GOD KNOWS WHAT UR SAD ASS WAS DOIN AT 14

568.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...