Jump to content
SAU Community

Changing The Turbo On R33Gtst, Much Work?

Torques

By Torques,
in General Maintenance

 Share

Recommended Posts

ARTZ Grand Master

ARTZ

Posted
Posted

Thats not a very fair comment. Some people actually enjoy working on cars and helping people out. Not just out there to get rich.

U don't trust a person but u trust Ebay gaskets lol

haha

hmmm..i do see your point...the gasket was from nitto though. They sell good stuff, dont they?.

i didnt say dont do it, I said only do it if you trust the guy, Ive seen some horror stories of the guy at the pub that said he would do it on the cheap..mostly i was trying to convince him to do it himself cause he thought he could

mosquitocoils Veteran

mosquitocoils

Posted
Posted

Getting is out is not that hard, getting the water banjos back on is a royal PITA.

Without a doubt, that is the hardest part!

Took me at least an hour to get the first one back on!! Then about half an hour for the next, and the last 2 were easy.

ssxRicho Grand Master

ssxRicho

Posted
Posted

ive got a 3" dump. but when you run a small highflow (21U) around the track for 3 months the manifold and exhaust housing on the turbz don't last.

Mine is leaking atm (near blowing the gasket to shit) and will only do 1-2 more track days before it all needs to come out again.

ARTZ Grand Master

ARTZ

Posted
Posted

ive got a 3" dump. but when you run a small highflow (21U) around the track for 3 months the manifold and exhaust housing on the turbz don't last.

Mine is leaking atm (near blowing the gasket to shit) and will only do 1-2 more track days before it all needs to come out again.

wow that bad huh , cant upgrade to an OP6.

So you just have to pull it out and replace housing and manifold or just gaskets?

You must be doin quite a few trackdays then, im pushing more power through the same housing but it doesnt get flogged anywhere near as hard as yours, well not consistently anyway :P be interesting to see how it lasts I guess my ebay gasket will no doubt give up before anything else , at least I hope it does

Trent fixed her up for me last week too,, come round and have a drive if you like sometime its running great. 430nm at 3500rpm See what ya think ;)

mad082 Grand Master

mad082

Posted
Posted

Really?

I thought (hoped) half way through ...

But anyhow, everybody has a first time at everything and I will get there (eventually)

:)

you have all the easy but fiddly bits done. all you have left is the hard and fiddly bits with a side order of swearing to go. lol. don't worry, you'll get there

Torques Mentor

Torques

Posted
  • Author
Posted

>_<

Yes, you are right .. now it is hard and fiddly.

(unsure which part of the work I like better)

I was meaning to remove the turbo yesterday, but had to buy 2 axle jacks first (poor excuse)

But I removed further piping and also prepared the turbo by undoing the locking clamps.

I remember when I first removed the cylinder head of my motorcycle, it took 4 hours.

After some practise I was able to remove it and put it back on in one hour :)

Cheers from London ..

Torques Mentor

Torques

Posted
  • Author
Posted (edited)

Alright,

The Turbo is out ..

Worst bit:

The Water-Return-Pipe banjo bolt.

Also the turbo to manifold bolts gave me much less trouble than expected, thankfully I had an ultra slim ring-spanner

in my toolbox ... and it was even 17mm! :) The spanner did fit right over the nut, so I was lucky.

I did not remove the dump-pipe from the turbo, it was not a problem getting the turbo out.

(Just removed the 3 nuts from the downpipe to dump-pipe connection.)

Would I do this again?

Yes, but only in a proper garage ... not in an underground parking space.

More later ... many thanks for the help .. :)

post-33912-0-98452000-1305375640_thumb.jpg

post-33912-0-31695400-1305376795_thumb.jpg

post-33912-0-16382400-1305376805_thumb.jpg

Edited by Torques
ARTZ Grand Master

ARTZ

Posted
Posted

nothing wrong within an underground carpark mate.

At least its out of the rain

This is my 'garage' and its been apart more than a few times before in it..

13032011409.jpg

This is actually an upgrade my last 'garage' was only half as big :D

Torques Mentor

Torques

Posted
  • Author
Posted

Good point, yes .. I plugged every opening with a cloth ..

Especially the pipes to the inter-cooler which are now wide open .. don't want any clip ending there, and then being vacuumed

by the turbo ...

Becareful with the compressor outlet of the turbo or any other opening eg cooler piping etc. Cover them up with rags or similar, its very easy to drop something in them.

Torques Mentor

Torques

Posted
  • Author
Posted

Haha ....

Yes, nothing wrong with it, but I got strange looks from fellow citizens ;)

I like your garage ... very airy and no prying looks!

Also close to the next fridge I suppose!

BTW:

Attached why I had to remove the turbo ..

nothing wrong within an underground carpark mate.

At least its out of the rain

This is my 'garage' and its been apart more than a few times before in it..

13032011409.jpg

This is actually an upgrade my last 'garage' was only half as big :D

post-33912-0-84894100-1305490470_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      RH9 R32 GTR Build Thread

      By soviet_merlin · Posted

      Out of curiosity, how do you cover up the inspection hole? Surely it doesn't sit open like that, right? With grime and dirt coming in and oil going out?
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...