Jump to content
SAU Community

Amazing Amount Of Random Crap Sale!


Recommended Posts

All sorts of crap for sale and plenty more not listed, if you see something in the background you want come get its all got to go. Located in Glenfield in sydney.

Call/sms 0400 604 293 or reply on here.

TURBOS

R32 gtr turbos, blown $20

R32 gtr turbos with actuators, working fine when removed, never boosted hard they were for running in only $100

post-26632-0-39364200-1304847521_thumb.jpg

R33 GTr turbos, removed from motor I got for the race car complete with dumps etc. I will keep the 02 sensors though $200

post-26632-0-33406000-1304847908_thumb.jpg

Custom GTR dumps and front pipes, nice merge from the wastegates. $200 from turbos to cat

post-26632-0-44728700-1304847557_thumb.jpg

RB26 exhaust manifolds/ heat shields $20 each

Custom gtr turbo inlets, front and rear. Provision for blowby but removes plumback for BOV's $30

post-26632-0-41725800-1304847584_thumb.jpg

ENGINE BAY

R33 plastic undertray $10

post-26632-0-07253600-1304848130_thumb.jpg

R32 GTR radiator overflow tank $10

R32 GTR washer bottle $10

RB25 coilpack cover $10

RB25 Inlet manifold with bolts and gasket. $20

RB26 Front Timing cover Black and Clear $20/$40

R33 GTST a/c auxillary fan $10

R33 GTST GREDDY fmic piping kit, cold side $50

R33 GTST piping from Throttle body to drivers guard, without going over to the exhaust side rocker cover, kept room for big turbos $20

R32/R33 GTST piping with 2x bov from throttle body to standard intercooler holes on passenger side, again keeps room for big turbos $20

GTR turbo setup piping instead of "twin turbo" pipe, crosses behind radiator. Had used in conjunction with the above pipe with 2 bov's to use the gtr manifolds on the rb20 $50 (comes with BOV's)

MECHANICAL

post-26632-0-56316000-1304847951_thumb.jpg

R33 GTST intercooler and piping $50

post-26632-0-46216600-1304848489_thumb.jpg

R32 GTR brake booster $20

R32 GTR clutch booster $20

R32 GTR factory pedals $10 each

R33 GTST Brake lines front and rear $20

R33 GTST Front rotors still plenty of meat $50

post-26632-0-75189000-1304848001_thumb.jpg

R33 GTST throttle cable $20

R33 GTST Fuel pump with bracket, use to mount your bosch etc so you can do a quick swap $20

post-26632-0-83965000-1304848040_thumb.jpg

R32 GTR gearbox mount $10

R33 GTR water pump- replaced with N1, still in good condition $10

Power steering pump bracket $20

R32 GTR clutch fluid loop $10

BODY/STYLING

3d GT wing with brackets and stands, everything needed to fit, as new $100

post-26632-0-06195900-1304847463_thumb.jpg

R33 front reo, hacked up. Keep yours and use this one $30

post-26632-0-89148400-1304847627_thumb.jpg

R33 Boot in maroon / wine red $50

post-26632-0-78076700-1304847806_thumb.jpg

4L of Nissan ANO paint for series one R33 $20

R33 GTST factory wheels with tyres (4) $100

post-26632-0-29915500-1304848392_thumb.jpg

Wheels that came on my shell, fit GTR ok but don't clear my big brakes on the front anymore. Used to basically roll the shell around. (4) $200

post-26632-0-11391700-1304847757_thumb.jpg

SUSPENSION

S14 or R33 rear camber arms, brand new never fitted $100

post-26632-0-12530800-1304848089_thumb.jpg

R33 front castor rods, rubbers gone, put some new bushes and off you go. $10

post-26632-0-85835200-1304848270_thumb.jpg

R32 GTR steering rack, rubber great $40

post-26632-0-13660700-1304848308_thumb.jpg

R32 GTR Standard front upper arms $50

INTERIOR

R33 gtst parcel tray support $5

R33 Jack bracket in boot $5

R33 ecu bracket $5

post-26632-0-92926500-1304847713_thumb.jpg

Blitz boost gauge $5

post-26632-0-81797700-1304847855_thumb.jpg

Apexi SAFC $50

S14 ECU and AFM from the same car $80

SR20 engine Loom $100

post-26632-0-93885400-1304848227_thumb.jpg

RB26 loom suitable for making a haltech/motec loom etc, has connections but a clutch went and damaged it near the wiper motor. I had planned to use it to make a loom for the racecar. $100

post-26632-0-36629400-1304848192_thumb.jpg

The other loom pictured, I think is for sr20 aac etc don't remember. If it looks like what you need then grab it.

post-26632-0-55667100-1304848428_thumb.jpg

Link to comment
Share on other sites

some details of the intercooler piping bits on offer

R33 GTST GREDDY fmic piping kit, cold side $50

R33 GTST piping from Throttle body to drivers guard, without going over to the exhaust side rocker cover, kept room for big turbos $20

First pic shows GREDDY piping and the black/silver pipe (was black now painted silver)

post-26632-0-79384800-1304929687_thumb.jpg

post-26632-0-95041400-1304929614_thumb.jpg

R32/R33 GTST piping with 2x bov from throttle body to standard intercooler holes on passenger side, again keeps room for big turbos $20

GTR turbo setup piping instead of "twin turbo" pipe, crosses behind radiator. Had used in conjunction with the above pipe with 2 bov's to use the gtr manifolds on the rb20 $50 (comes with BOV's)

post-26632-0-51932300-1304929710_thumb.jpg

The approximate layout, with bov's positioned to plumback in front of gtr turbos. I do not actually have pics of the grey pipes on a car as they were on Jago's rb20. priced basically because they have 2 BOV's.

post-26632-0-10571200-1304929658_thumb.jpg

post-26632-0-10600300-1304929629_thumb.jpg

also selling the adaptor plates to allow gtr manifolds to bolt onto rb20/25 exhaust side. where on my r33 for around 4 years $150

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • some people are still around weirdly enough - most people just use facebook now to ask the same 12 questions tho XD  
    • Omg Rezz! Yep we're still here and actually seeing a trickle of oldies coming back.  How's things? 
    • So I raised the car up a fair bit for shipping - see image - then lowered it again when it arrived. I then rushed to get an alignment in NL before the track and the shop just wasn’t anywhere near as precise as what I got in Japan. The guys that did the alignment this week said there was a fair amount of toe in the rear that could have contributed to the understeer. It was also the case that the rear camber went from about -2 to -3 at the shop in NL. However, since I’ve now got slightly wider tires in the rear - NS2Rs run wider than Accelera 651S - I could only get a minimum of -3 in the rear now due to clearance. Front is now -2.75 (-2.45 in minutes) due to being raised a bit (previously -3 in JP). So it’s likely a combination of the two factors, camber and toe. The issue now is I have more camber in the rear than the front and the next step on the front Cusco arms will put me at -3.5ish front which seems a bit excessive to me. The weird thing is I’ve never had any understeer at the track in Japan but they are very different circuits - Japanese circuits are much slower than the one I’ve been to here.    I’m probably going to have to start another thread for the E90. The plan is sort of to keep it as a daily but progressively mod it into a track car - honestly, you need a cage for the sort of speeds you go here. Just ordered the M3 front arms btw.  Love the car despite it being in pretty shitty condition. Oil analysis came back okay and it seems to have stopped consuming oil since fixing a load of engine bay things. Saw yours is a 335i right? f**king mistake on my part getting the DI N53 over the N52, fuel economy is insanely good though at 14-16 km/L.   Cheers, it’s great to see the benefits and pitfalls of different places. I’m contemplating going back to the U.K. around next year as the cost of living in the Netherlands is just ridiculous. GF is nagging me to settle and buy a house but I don’t know what LSD to buy. 
    • Have you seen the Milwaukee Train Horn? It's a beast! I stumbled upon it while browsing for upgrades. I'm thinking of adding it to my ride for some serious sound. Here's the link if you wanna check it out: https://bosshorn.com/products/milwaukee-train-horn. Anyway, thanks again for sharing your method.
    • Anybody home...? I used to moderate this part of SAU about 20 years ago... hard to beleive it's still around basically unchanged with all the old posts pinned at the top. Amazing to read all those posts again.  If anyone drops by, I'm still in Japan (Nishinomiya, between Osaka and Kobe).  Cheers 🙂
×
×
  • Create New...