Jump to content
SAU Community

Recommended Posts

lol, it kept telling me the post didn't work!! I tried it a couple of times with no apparent sucess and went to bed last night thinking it had failed :rant:

I'll give the guy painting the wheels a call Monday or Tuesday, but the 8th could be cutting it fine.

Im after another trans cooler or a 25 to 30 row oil cooler that I can run with a fan to keep the auto cool.

Let me know what you have got

This is what you are after Rob. I'd much rather spend a bit more and get a brand new one, that way you know it isn't chockas with shit

http://www.ebay.com.au/itm/B-M-HI-TEK-TRANSMISSION-OIL-FLUID-COOLER-W-ELECTRIC-FAN-/360405477020?pt=Motors_Car_Truck_Parts_Accessories&hash=item53e9d7269c

I'm getting the woman's R33 on the road, I'm after a few random things people might have from popped engines/upgrades?

Stock S1 coil packs (need to be good for 12psi) or cheap after markets

RB20/25/30 Harmonic Balancer w/AC (pref no dents/chips)

Tensioner and Idler pulleys, non rattly (mine were seizing)

The bolt (and if possible 2 washers) that go with the t-belt idler pulley

And just for my R33, a split dump pipe, either just the top/front section or all the way to cat, as I have a stock front pipe with 3" dump and am trying to fix slight over-boosting.

Just PM me! Cheers

-Dan

I'm getting the woman's R33 on the road, I'm after a few random things people might have from popped engines/upgrades?

Stock S1 coil packs (need to be good for 12psi) or cheap after markets

RB20/25/30 Harmonic Balancer w/AC (pref no dents/chips)

Tensioner and Idler pulleys, non rattly (mine were seizing)

The bolt (and if possible 2 washers) that go with the t-belt idler pulley

And just for my R33, a split dump pipe, either just the top/front section or all the way to cat, as I have a stock front pipe with 3" dump and am trying to fix slight over-boosting.

Just PM me! Cheers

-Dan

i would have a ballancer and im coming down to hobart this weekend if you want it.

The 32 with a carbon bonnet is Xrated i think. I used to drive a blue 31 with s13 wheels. Had a white 31 parked out front for ages. Been stuck driving the shitty VN wagon, the D21 Navara and the missus 04 Corolla. Soon i'll be getting about in my Black over grey 31 Coupe though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...