Jump to content
SAU Community

Recommended Posts

hey all im bout to buy a "hybrid" fmic 600x300x76. dose ne 1 know roughly what kind of price i will be looking at to get the piping made up for this? or has ne 1 had good bad experiances in adelaide with this?

also wanting to know what kind of boost increase i can do with the front mount, and what kind of power gains i will get?

i have a 1993 r32 gts-t m-spec with cat back exhaust and HKS pod. the boost is @ 12psi atm.

thanx guys.

a few guys on the site have got the hybrid coolers on their car and getting around the 170rwkw mark or more. with good tuning and full exhaust. with the stock turbo i wouldn't go past the 12psi for everyday driving, 14psi if you going down the strip. its the heat of the turbine blade spinning to fast where it actually mealts and stuffs up so. yeah. good luck with the cooler. on ebay you can get them for about 550.

i run 1 bar (14psi) of boost with cooler, exhurst, electronic boost controller...no idea about how much wk's its making...will take it to get dyno'd soon

OH make sure your fuel is all good...cos alot of those GTST fuel pumps are stuffed/ near stuffed. So when u boost it to 14psi on the dyno get them to check the fuel out.

you can pick up a hybrid 600x300x75mm for $700ish from justjap a sponser of this forum, www.powerdigger.com were selling the hybrid gts-t piping kit for $450ish or rolin imports (as you mentioned) here in Qld can get the same piping kit for around $600!!

you can pick up a hybrid 600x300x75mm for $700ish from justjap a sponser of this forum, www.powerdigger.com were selling the hybrid gts-t piping kit for $450ish or rolin imports (as you mentioned) here in Qld can get the same piping kit for around $600!!

Mate get it from the intercooler guy, he makes up the best looking best performing kits around for good $$ i just got mine yesterday and its the best ive seen, he is the most helpfun bloke i have met in the industry and will help you out with anything. 10 out of 10 for him, rollin is a bit overpriced but i got my rb20det half cut from them for ok price $2200

whos doin your piping bro?

and what kind of piping and for what car .. because im looking to get piping done too

ashmore exhaust at miami is the place, also the only place who quoted less that $800, all up $450 for all pipes, cutting body work, bends, hoses, clamps and labour, the car is in my avatar the engine is a silver top rb20det so had to go custome piping! the work is great and they even remounted the pod filter to a better spot using a bit of 3" piping!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...