Jump to content
SAU Community

Recommended Posts

  • Replies 3.6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

If someone laughs at you for not making massive KW's then they have a problem. I say do it for shits and giggles and at the same time you can find out what your car is actually making :D

If someone laughs at you for not making massive KW's then they have a problem. I say do it for shits and giggles and at the same time you can find out what your car is actually making :D

Who cares about power. I would laugh at him for owning an AU

OK..i have a big ugly caryard sticker on my rear windscreen its the chippy reflective vinal stuff :sick: .

I would like to remove it , im asking suggestions before i attempt this as i know it will get messy.

I was thinking of using Bug & Tar remover (worked wonders on the debadge.)

Please help.

Hair dryer / Heat gun awesome idea.

I did sort of try it but due to the type of vinal it chips off in vrey very small portions.

LOL.. This sucks may take a while :rolleyes:

Thanks for the help.

Stanley knife blade.

I know there's 8000 hicas threads but i think it's worthwhile to post a question on here rather than scour the abundance of info straight away. My hicas light on my dash has quickly flashed once on two separate driving occasions. I have no irregular steering symptoms but I have noticed both times it happened just after taking off (normal driving) and slight steering movements. The car was serviced on monday I figure it might be a bit of air in the system or something. Anyone got any ideas?

Hicas is not locked or bypassed all standard in that department. Will be happening soon though..

I know there's 8000 hicas threads but i think it's worthwhile to post a question on here rather than scour the abundance of info straight away. My hicas light on my dash has quickly flashed once on two separate driving occasions. I have no irregular steering symptoms but I have noticed both times it happened just after taking off (normal driving) and slight steering movements. The car was serviced on monday I figure it might be a bit of air in the system or something. Anyone got any ideas?

Hicas is not locked or bypassed all standard in that department. Will be happening soon though..

fluid sensor on ur powersteering. possibly needs a top up to cope with +ve g's

On another topic

Anyone wanna go to Burger Foundry?

Want to stab a dolphin in the face unless I get one of their tasty burgers....

save the dolphins. drive dohmar to burger foundry.

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...