Jump to content
SAU Community

Recommended Posts

  • Replies 3.6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Was having a good day then notice a hole in our fence at work. Can't find anything missing tho. Can't wait to get these cameras up so we can see who's coming in from home and bust them.

Was having a good day then notice a hole in our fence at work. Can't find anything missing tho. Can't wait to get these cameras up so we can see who's coming in from home and bust them.

put some volts through the fence nuss lol

Was having a good day then notice a hole in our fence at work. Can't find anything missing tho. Can't wait to get these cameras up so we can see who's coming in from home and bust them.

put a 2 guard dogs in there, let them wander around at night

what are peoples thoughts on 2001 BA xr6 turbos?

tips and tricks? what to look out for?

I've heard something to do with the diff bush giving out and gearbox can if iffy.

My dad had a BA and BF and both of them the interiors fell to bits, silver trimmings shrivled in the heat and the electrics gave out on the BA and the gear stick snapped off the BF.

They where both under 10,000km when it happend.

Nice cars otherwise :laugh:

Just spoke to dad and he also said he had PCM and bcm failures and the front brake lines needed replacing due to some dodgyness.

Edited by Import S13

Adrian feel free to drop by my place over the weekend and have a gander at my old mans 03 XR6T. He loves to talk about it and I myself can give you some valuable info regarding servicing, maintenance and clever mod strategy.

Standard brake rotors have been known to warp as young as 20000km's old, the power windows give up after a while, there were re-calls for a water pump issue in some cars (an o-ring) and also standard issue tyres were also replaced free of charge when there was a deterioration issue discovered.

Be aware of transmission related stuff (the early auto's are crap basically) and I do know a bloke that had his diff replaced for no reason. Dodgy trans service.

Among all things, Ford simply cannot be trusted to tint windows.. At all.

Personally I would steer clear of an 01 BA, AU falcons are marginally cheaper pretty much the same car/level of shitness.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...