Jump to content
SAU Community

Recommended Posts

The main thing about the ones i have are they sit in the stock position and being from SA where they enjoy defecting everything that's wha really appealed to me. Although it won't be a daily driven car and iv been pulled over more in my stock vs commondore than i have in the skyline.

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

The main thing about the ones i have are they sit in the stock position and being from SA where they enjoy defecting everything that's wha really appealed to me. Although it won't be a daily driven car and iv been pulled over more in my stock vs commondore than i have in the skyline.

that's a fair concern,

Both -5's

and GT-RS sit in stock position as do a myriad of other high powered twin setups.

there is definitely a pair to accommodate your power needs.

Ye just get -5s like everyone else. About your only option mate if low mounts/defects is the main concern, especially if its a street car.

Factory size, Garrett housing, everything bolts up and you'll make 370-400rwkw depending on the motor.

Yea the bottom end has the works. All except extended sump. But has a baffle kit in. Got forged pistons, rods bearing what ever else i got in the build. It was a head gasket down build. As nothing was done with the head except for a face pressure test and what ever else they did to it. As at the time i was un certain of the direction of the car!

Bottom end done as in... A 'typical' bottom end, or one built to take 9000rpm+

Big big difference between the two!

Ye just get -5s like everyone else. About your only option mate if low mounts/defects is the main concern, especially if its a street car.

Factory size, Garrett housing, everything bolts up and you'll make 370-400rwkw depending on the motor.

Bottom end done as in... A 'typical' bottom end, or one built to take 9000rpm+

Big big difference between the two!

There is a place, where nobody dared to go, and It isn't called Xanadu, its called GT-RS on a 2.6 litre for a street car.

Olivia newton John will not bring your response back to you on roller blades.

Agree with Ash 100% althought I think you could possibly make a tad more then 400rwkw.

Yep, -5s all the way

We built a car while i was working at Advan Performance that ran -5's with a healthy head and sensible cams and on about 24psi of boost made about 450rwkw on BP Ultimate. Thats more power than you will ever need on the street and also a very healthy power figure for the track.

Using these you wont need to worry about defects, you wont need to build a bottom end capable of 9500rpm and you will get much better response than you could ever dream of getting with the 2835's.

Yep, -5s all the way

We built a car while i was working at Advan Performance that ran -5's with a healthy head and sensible cams and on about 24psi of boost made about 450rwkw on BP Ultimate. Thats more power than you will ever need on the street and also a very healthy power figure for the track.

Using these you wont need to worry about defects, you wont need to build a bottom end capable of 9500rpm and you will get much better response than you could ever dream of getting with the 2835's.

Was that on a stroker motor? What a Awsome result... Providing it is not a happy dyno. Wouldn't happen to have that graph by any chance?

The 2835's that i have do sit in the stock position. They are internally gated version.

So? (im confused...)

You don't have the motor to support them... Why use em?

Get something that will suit the setup is what you should be aiming for.

End of the day everyone is saying the same thing and pick turbos suited to the application, but it seems you still want to put 2835s on... So i guess go with that.

When i first brought them i didn't realise they were such a serious option. Defect aside iv wanted to build a car with a big single. Well a decent sized single. Then these came up. So i grabbed them. If i sell them off ill probably look at the t04z option again if there is going to be less hassle chasing good power. I'm just trying to weigh up the odds. Do i sell them off and start putting together a single. Or keep them work with what i have and spend coin in the areas to achieve a decent power from these. Like working on the head fuel system and drive line which ill have to do anyways with either option. That'll most likely be a pig to drive but once its rolling its gonna be scary.

Ill re phrase it. Everything aside. Which turbo set up is going to perform better with minimal head work? And be more streetable. Basically if i gave the keys to my mum and said take it for a strap what would she be best suited to drive

Ill re phrase it. Everything aside. Which turbo set up is going to perform better with minimal head work? And be more streetable. Basically if i gave the keys to my mum and said take it for a strap what would she be best suited to drive

like I said before...neither the T04Z or the 2835s are going to be street friendly on a 2.6 no matter what you do to the head/Cams

Are you going to take the car to the Strip?

If not than get a pair of -9's/GT-SS'

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...