Jump to content
SAU Community

Recommended Posts

Hi everyone, so I'm looking to get rid of my r34 gtt wreck as well as the stock parts I have left over, the car is currently stored at my parents place in Mt Eliza Vic.

It has a few very new aftermarket parts most of which have only been on the car around 5000kms.

Also included are all of the stock parts I have sitting around. If this doesn't sell as a package I'll part it out later when I have time.

As far as I can tell and from what insurance said there is damage to:

- bonnet

- front right quarter panel

- scratches on the roof and right side

- wheels are chipped, not sure if some are bent or repairable or usable (r34 GTR wheels)

- front bumper

- intercooler all bent in, not sure if you can bend these back to shape (Blitz return flow fmic)

- apparently suspension is also messed up, not sure on this stuff (Bilstein shocks, no idea what springs)

Aside from the broken intercooler and wheels the following undamaged aftermarket bits are installed:

- Apexi pod filter (hidden under air box in photos)

- Z32 AFM

- A proper garret spec GT3076r kit from GCG with the .82a/r housing and 4inch surge slotted inlet

- Blitz SpecR dual solenoid boost controller

- Bosch 73LB(~750cc) EV14 injectors

- Full turbo back 3" exhaust system with a Kakimoto Regu 06&r Catback

- A tuned Nistune ECU (by Trent at Status/Chequered Tuning, 304rwkw)

- Splitfire Coil Packs

- Nismo fuel pump

- Nismo Super Coppermix Clutch/Flywheel

- Autogauge 52mm Volt, Oil Temp and Boost gauges

- Alpine head unit and Rockford Fosgate Amp

The stock parts I have left over that I will throw in include:

- Wheels/tyres

- Turbo + lines + HKS actuator

- Clutch/flywheel

- Exhaust

- Fuel pump

- Air box with K&N panel filter

- AFM

And probably some other bits and pieces that I've forgotten.

As I said most of those aftermarket parts have been on the car about 5000kms or less so are like new.

The car has 140,000KMs on it, I've serviced it every 5000kms with a new oil filter, Motul 8100xcess oil and new spark plugs, the timing belt was done at 114k when I bought it.

Here is the dyno sheet it makes 304rwkw at 19psi with 98,can easily make more on E85 as well, never got to try it though:

post-66560-0-01835600-1306814736_thumb.jpgpost-66560-0-98767800-1306814773_thumb.jpg

And here are pics of the car:

post-66560-0-09640600-1306814805_thumb.jpgpost-66560-0-68468000-1306814826_thumb.jpgpost-66560-0-20272000-1306814855_thumb.jpgpost-66560-0-39622900-1306814885_thumb.jpgpost-66560-0-04841800-1306814954_thumb.jpg

post-66560-0-88666800-1306814980_thumb.jpgpost-66560-0-27016300-1306815012_thumb.jpgpost-66560-0-99477300-1306815043_thumb.jpgpost-66560-0-45524900-1306815072_thumb.jpgpost-66560-0-49202100-1306815115_thumb.jpg

post-66560-0-91291800-1306815142_thumb.jpgpost-66560-0-21606500-1306815164_thumb.jpgpost-66560-0-94688400-1306815202_thumb.jpgpost-66560-0-72969800-1306815233_thumb.jpg

I'm starting at $9000 negotiable, the aftermarket parts themselves (excluding the damaged ones) easily cost over 10k and are near new, plus you get a whole car and most of the stock parts that were replaced as well!

You'll need a trailer or a tow to get it, SMS me(0417232717) or pm me anytime to organise having a look (car located in Mt Eliza).

I work nights so I'm available all day every day (prefer afternoons), feel free to make me an offer but please don't screw me around and waste my time, only bother if you have genuine interest in purchasing!

If it hasn't sold in a month or two ill start parting it out.

Thanks, Terry.

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

lm interested in the front and rear bars and wheels how much for each if you are willing to sell as parts

and how bad is the front bar and is it fiber glass or plastic

I can vouch for everything described here, was a much loved and cared for car while it was on the road, sad to see it all go :(

Thanks thumbsup.gif appreciate it.

how much for z32 with plug posted mate?

if u decide to part out that is lol

PMd

lm interested in the front and rear bars and wheels how much for each if you are willing to sell as parts

and how bad is the front bar and is it fiber glass or plastic

PMd

Do you happen to still have the Standard turbo.. if so how much?

Thanks Pat

PMd

Hey Buddy,

Super keen on the Exhaust, but only the Cat back section... Interested in splitting?

Cheers

PMd

:rolleyes: Sorry fella's.

I saw Terry's thread when he first posted and straight away PM'd an EOI on a list of parts. If he decide to part out.

Once decided to part out I put cash put down on the following parts:

- Apexi pod filter (hidden under air box in photos)

- Z32 AFM

- A proper garret spec GT3076r kit from GCG with the .82a/r housing and 4inch surge slotted inlet

- Blitz SpecR dual solenoid boost controller, wiring and display

- Bosch 73LB(~750cc) EV14 injectors

- Full turbo back 3" exhaust system with a Kakimoto Regu 06&r Catback

- A tuned Nistune ECU (by Trent at Status/Chequered Tuning, 304rwkw)

- Nismo fuel pump

The white/cream in boot fuel tank cover under the black ring.

Fuel pump and cradle are beneath it.

Sorry what?

:rolleyes: Sorry fella's.

I saw Terry's thread when he first posted and straight away PM'd an EOI on a list of parts. If he decide to part out.

Once decided to part out I put cash put down on the following parts:

- Apexi pod filter (hidden under air box in photos)

- Z32 AFM

- A proper garret spec GT3076r kit from GCG with the .82a/r housing and 4inch surge slotted inlet

- Blitz SpecR dual solenoid boost controller, wiring and display

- Bosch 73LB(~750cc) EV14 injectors

- Full turbo back 3" exhaust system with a Kakimoto Regu 06&r Catback

- A tuned Nistune ECU (by Trent at Status/Chequered Tuning, 304rwkw)

- Nismo fuel pump

Yeah these items are now gone as well as the brackets from my intercooler

everything else still available :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...