Jump to content
SAU Community

Recommended Posts

I've done some searching and am finding it difficult to get a "decent" top mount manifold without the external gate setup as I wish to run a hks 2530 or my rb25 neo turbo with highflowed internals. Manifold would be for a rb20det. Any ideas on a good brand that won't see me swearing after 3 months. :)

I'm not aware of any that exist.

Why spend 1200-1400 on a manifold when there is next to no gain?

A 2530 is only going to make 230rwkw at the most, which is well within the stock items capability.

If you were talking 260+ then you'd perhaps think about it simply because the TD06 kit comes with one.

My custom made high mount manifold only cost me like $1100, but that was with external gate, I'm sure he could have just as easily have done it with out it.

You can always just put a plate over the external gate flange until you get one, mate of mine did that when he was waiting for his new turbo to arrive.

Yeah I guess the hks 2530 is a little small for 260+kw. Never read much into the td06 but found the kit here http://nozzs.com/index.php?main_page=product_info&products_id=146 for $1250 which is a bargain if we are talking bang for buck. Saves hassles with finding a new turbo/ manifold/ extended dump pipe/ extended oil line ect. I think it might be my best option. Save a few dollars for cams. :)

You do realise that's a copy kit yes? With what looks like a nasty cheap manifold... All i can foresee is disaster with that knock off kit...

The proper Trust kit, that comes with a decent manifold, costs a LOT more than 1200.

Haha I know but I'm sure there's someone out there who will buy it one day :P the Greddy kit would be 1200 each part. But I'm thinking it might be worth it. Cheap mods cost more I'n the long run. Trust me I'm forever looking for replacement parts for all the cheap mods on my car from the previous owner. Lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...