Jump to content
SAU Community

Recommended Posts

having an issue with my clutch, put a brand new slave and master cylinder in my 33. clutch was perfect for around 600klms and then is started picking up right near the floor and now i can't even get it into gear.

just wondering if anyone knows what to look for?

my first opinion was air in the system, not being bled properly, but then it lasted 600klms..

anyone knows how to troubleshoot would really appreciate it..

Shane

Link to comment
https://www.sau.com.au/forums/topic/367029-rb25det-clutch-drama/
Share on other sites

I would bleed the master and slave just to make sure there is no air in the system, or a leak. Did you replace the clutch line?

I know the master and slave are new but new doesnt always mean it will work. better off catching it now if thats what it is and claiming waranty. If you bleed everything and then its still the same then you probably have a clutch problem. If it works all good then gradually goes away again then you have a problem somewhere between your pedal and the clutch fork. Fork is moving, but may not be moving through the full motion

Well it sounds like your clutch hasnt started slipping, sounds like theres not enough travel to engage the pressure plate to disengage the clutch

so in that case.... some sort of pivot ball issue? I'm not sure what happens when the pivot ball fails, I know it leads to clutch issues. You could maybe grab a torch and pull the rubber boot for the fork aside and see if theres anything obvious. But I'm not sure how much you will see. How much travel does the slave have?

Did you adjust the freeplay in the clutch pushrod?

You may also have cracked the pivot on the thrust fork so that it will open up when the pedal is depressed, reducing the ability of the thrust bearing to properly disengage the clutch.

Well it sounds like your clutch hasnt started slipping, sounds like theres not enough travel to engage the pressure plate to disengage the clutch

so in that case.... some sort of pivot ball issue? I'm not sure what happens when the pivot ball fails, I know it leads to clutch issues. You could maybe grab a torch and pull the rubber boot for the fork aside and see if theres anything obvious. But I'm not sure how much you will see. How much travel does the slave have?

When you snap the pivot, the pedal will go to the floor and not come back up without help. Had to drive home like it was an 18spd road ranger box :laugh:

Yeah i had that happen to me recently and my clutch had only done about the same km's.. brand new.

I checked the pivot/fork, new slave+master.. everything appeared to be fine, so last weekend with a couple mates off came the box..

only to find that the pressure plate bolts where not done up, well i lie, 3 where.. 6 wherent.. so the plate was sitting on the piss...

Tightened them up and box back on, bam! no problems ;)

Who did ur clutch?

Yeah i had that happen to me recently and my clutch had only done about the same km's.. brand new.

I checked the pivot/fork, new slave+master.. everything appeared to be fine, so last weekend with a couple mates off came the box..

only to find that the pressure plate bolts where not done up, well i lie, 3 where.. 6 wherent.. so the plate was sitting on the piss...

Tightened them up and box back on, bam! no problems ;)

Who did ur clutch?

What the hell! Who did your clutch??

When you snap the pivot, the pedal will go to the floor and not come back up without help. Had to drive home like it was an 18spd road ranger box :laugh:

I should have known that lol...... Now that you've said it I feel like an Idiot for not remembering haha

I put some lube on mine when I put my box back in last time, no more squeaking, and the clutch feels a bit nicer :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...