Jump to content
SAU Community

Recommended Posts

Not true. A cat that is working stores a lot of heat compared to a gutted cat so all the epa need is an infra-red thermometer to check it's temp compared to the rest of the exhaust.

doesn't the stock cat have a heat shield on it? then they'd have to get under your car and take it off to see the surface temp of the cat. which means it needs to be on a hoist. which means you're at an EPA station, which means you've been issued an EPA notice already...

point is. could any cop/road side inspection tell that your running a 'decat' inside a cat shell.

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Very highly doubt a cop could tell you have a decat. Unless they have emissions testing equipment?

Either way if you are at an epa station, you arent going to keep the decat on the car. Regardless of the method they use, they will pick you up for a gutted cat, everytime. You would have to be a complete idiot to turn up for your epa inspection with a gutted cat.

doesn't the stock cat have a heat shield on it? then they'd have to get under your car and take it off to see the surface temp of the cat. which means it needs to be on a hoist. which means you're at an EPA station, which means you've been issued an EPA notice already...

point is. could any cop/road side inspection tell that your running a 'decat' inside a cat shell.

They might confiscate it off you first. Then you wouldn't be able to re-cat it.

Is there that much of a flow difference that you could notice the difference between a 100cell cat and a decat? I've looked inside a 100cell cat before and it just looks like a punch of mcdonnald's straws stuck together? I'm sure it would make some filtration difference but I don't think the difference would be huge. If I did do the decat and somebody confiscated it off me I will have a spare one anyway.

I got defected last week when I wasn't doing anything wrong, If I was hooning I would understand but I don't feel like getting a road worthy again.

Is there that much of a flow difference that you could notice the difference between a 100cell cat and a decat? I've looked inside a 100cell cat before and it just looks like a punch of mcdonnald's straws stuck together? I'm sure it would make some filtration difference but I don't think the difference would be huge. If I did do the decat and somebody confiscated it off me I will have a spare one anyway.

I got defected last week when I wasn't doing anything wrong, If I was hooning I would understand but I don't feel like getting a road worthy again.

I dont think there is too much flow difference mate. Im assuming the car is a mild streeter, in which case i really dont think you would notice the difference between the two. As far as having your car confiscated, im pretty sure you have to be drag racing or doing burnouts etc that warrant a dangerous driving charge. In either case i can say that a decat will be the least of your worries. I think it comes down to your preference, and whether you want the peace of mind of not running a decat. For me, i just bought a hiflow because i didnt want the hassle of worrying about it. I even left it on the car when it went to the epa, and he just said it 'may' pass, but it would need engineer certificate.

I dont think there is too much flow difference mate. Im assuming the car is a mild streeter, in which case i really dont think you would notice the difference between the two. As far as having your car confiscated, im pretty sure you have to be drag racing or doing burnouts etc that warrant a dangerous driving charge. In either case i can say that a decat will be the least of your worries. I think it comes down to your preference, and whether you want the peace of mind of not running a decat. For me, i just bought a hiflow because i didnt want the hassle of worrying about it. I even left it on the car when it went to the epa, and he just said it 'may' pass, but it would need engineer certificate.

i suppose his decision is going to be based off how much a decat flows better/gains power/ less lag over a highflow cat versus the risk of being ass raped by the state government.

i don't think anybody here actually has any quantitative answer to how much decat flows better only that 'it does'.

Exactly ...way i see it there is nothing to be gained on the street from removing pollution gear so why not just keep it . Pretty sure I read somewhere that race/drift cars in Japan are required to keep pollution gear and they are hardly slow.

Whats it worth really ,10hp maybe at most, on a 400hp+ car its a pittance so just keep it and you will be doing the planet a favour . Just have a decat for the track if you want it and block of your charcoal cannister its not hard to change..

Do the right thing :D

PS.. This thread is stupid.....

all i know is you can get up to 20bhp gain from having a highflow cat!

in gran turismo 5 ofcourse..

Lmfao!! I bet Paul didnt run a cat in his supra in fast and the furious!

Seriously though, i agree with what arthur has said, but in the end it comes down to preference. Someone really needs to do a dyno run back to back with different cats to put this to rest, although i suspect the gains/losses in hp would be so little that it would just come down to different dyno runs.

the way I see it is that with a decat I can get an EPA, with a highflow I can get an EPA. Cops won't know it's a decat if the shell is still on it.

I want my car to sound a little bit more beefy than it does at the moment, but I don't want to be shattering glass as I drive past houses.

I don't really think it is easy to tell if a 2.5inch decat or a 3inch highflow cat has better flow without the use of something like a dyno test.

I've got a few weeks to think about it since I'm heading overseas next week.

the way I see it is that with a decat I can get an EPA, with a highflow I can get an EPA. Cops won't know it's a decat if the shell is still on it.

I want my car to sound a little bit more beefy than it does at the moment, but I don't want to be shattering glass as I drive past houses.

I don't really think it is easy to tell if a 2.5inch decat or a 3inch highflow cat has better flow without the use of something like a dyno test.

I've got a few weeks to think about it since I'm heading overseas next week.

With a good quality high flow cat you can pass an EPA. I think given there is barely any difference between a good high flow and a 3" decat, the high flow is the better option.

With a good quality high flow cat you can pass an EPA. I think given there is barely any difference between a good high flow and a 3" decat, the high flow is the better option.

but do the benefits outweigh the extra cost?

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...