Jump to content
SAU Community

Shaving Nissan Logo Off Brake Calipers

Hanaldo
 Share

Recommended Posts

Hanaldo Grand Master

Hanaldo

Posted
Posted

Hey all.

I'm after a more clean look for my brake calipers (not having issues with wheel fitment or anything like that) so I want to shave the Nissan logo off the side. Wouldn't go any further than that, I just want the flat face. Any suggestions as to how I could do that myself or would I have to take it to an engineer and get them to mill it off? Had thought of using a flapper disk but will that go through the metal?

Cheers,

Martin.

Daleo Grand Master

Daleo

Posted
Posted

Hey all.

I'm after a more clean look for my brake calipers (not having issues with wheel fitment or anything like that) so I want to shave the Nissan logo off the side. Wouldn't go any further than that, I just want the flat face. Any suggestions as to how I could do that myself or would I have to take it to an engineer and get them to mill it off? Had thought of using a flapper disk but will that go through the metal?

Cheers,

Martin.

Milling will definitely acheive what you're after, and you'll end up with a flat surface afterwards; something that will be very hard to get with a flap disc.

Also think about a belt linisher; would be nice to smooth out your machining marks after milling, but would easily do the job from start to finish if you've got a steady hand. Use a coarse grit belt to start, then finish with a 3M belt to smooth off for painting.

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted (edited)

Thanks for the replies.

Yeh I figured milling is probably the best way to go about it. But I'm not sure who near me would do it or how much it would cost.

Problem with a belt linisher is... I do not have one lol. What about a hand held belt sander, do the same job? Would that do a better job than a flapper? A file would do the job but that's a hell of a lot of work and probably wouldn't get a nice finish.

Edited by Hanaldo
Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

4" grinder did mine and then wet and dry (but i never got to the wet and dry) millings a waste of time and money,don't take any more than the letters off

Yeh that's all I want.

Thanks for the reply mate, that's what I was looking for :D

Legionnaire Collaborator

Legionnaire

Posted
Posted

It'd be interesting to see the result of your work.  

Post some pics when you're done with this "mod" as I'm still not sure whether calipers look better with or without logo. Are you gonna paint/coat them afterwards?

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

It'd be interesting to see the result of your work.

Post some pics when you're done with this "mod" as I'm still not sure whether calipers look better with or without logo. Are you gonna paint/coat them afterwards?

Yeh will do mate.

I'll definitely paint them. Not sure what colour yet though. Currently they are very dark blue to suit the GT logo. But I just got new bronze wheels and I want to get some blue wheel nuts. Haven't found any the same shade of blue, so I'm not sure if I should repaint them the blue they are now or a similar blue to the nuts. Decisions...

  • 2 weeks later...
Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Ok, so pics as promised...

I decided to use a 120 grit flapper disc on a 400w power drill instead of the angle grinder, as angle grinders and dye grinders are a bit too aggressive and end to take large bites out, making it difficult to get a nice finish. The flapper disc worked like a charm, albeit taking about 20 minutes of solid grinding to do each caliper. When the letters were gone I just hit the calipers with some 400 grit sandpapers to smooth them out, and the paint came out as you can see in the photo.

This is just after I started, I remembered to take a picture before I took anything more than paint off:

IMG_0827.jpg

And this is the finished product:

IMG_0831.jpg

This is the exact look I was going for so I'm very happy with it.

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

VHT mate. I actually repainted them with the exact same paint I had before, the finish doesn't change much. Obviously it loses a bit of shine, but if you do it right then it lasts.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...