Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm in the Market for a new car and have been looking into the new HSV GTS E3 range with a walkinshaw package. However the price is tipping into the JDM r35 price range.

I havnt seen too many that I've liked on carsales and would preferr a black one.

Just wondering if anyone is considering selling their black JDM r35? Or if anyone knew of alternative websites that may be advertising.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/368235-in-the-market-for-a-jdm-r35/
Share on other sites

for a car that expensive would you want a JDM r35 thats not covered by any warranty here in Australia?

why not buy ADM?

This.

If you do buy the JDM make sure your confident of driver/launch history. Or have many thousands of dollars ready in case you blow the transmission.

The JDMs are pretty tough, you would be unlucky to have problems with transmission and they are not that

dear to fix (unless you grenade it completely!) The HSV is a nice cruise car but not anywhere near the league

of the R35 GTR.

I never worried about factory warranty when I bought my 2008 R35 and other than a broken synchro ring

(which was unusual and just bad luck) that car never missed a beat. I tracked it a number of times and drove

the ring out of it up in the hills and it just loved it - thats what these cars are built for.

I have heard stories of GTRs that are babied and never taken out of auto mode and they seem to have more issues

with trans then the hard driven ones.

Case in point - Keir's Willall racing GTR. That would have to be the most thrashed R35 in the country. It has spent

hundreds of hours out at Mallala being taken to its limits and still has the original transmission going strong!!!.

Besides, if a factory part does break wouldn't it be better to upgrade it and put something better in anyway!

You could always buy that cheap white JDM in Qld and just paint it!

The JDMs are pretty tough, you would be unlucky to have problems with transmission and they are not that

dear to fix (unless you grenade it completely!) The HSV is a nice cruise car but not anywhere near the league

of the R35 GTR.

I never worried about factory warranty when I bought my 2008 R35 and other than a broken synchro ring

(which was unusual and just bad luck) that car never missed a beat. I tracked it a number of times and drove

the ring out of it up in the hills and it just loved it - thats what these cars are built for.

I have heard stories of GTRs that are babied and never taken out of auto mode and they seem to have more issues

with trans then the hard driven ones.

Case in point - Keir's Willall racing GTR. That would have to be the most thrashed R35 in the country. It has spent

hundreds of hours out at Mallala being taken to its limits and still has the original transmission going strong!!!.

Besides, if a factory part does break wouldn't it be better to upgrade it and put something better in anyway!

You could always buy that cheap white JDM in Qld and just paint it!

Totally agree, they are tougher than most think, and if something does break a) they aren't that exxy to fix and b) you wouldnt want nissan to fix it or necessarily use stocker parts. Not unless ou just drive the car on sundays as a cruiser anyway. And if you're just doing that, buy the HSV or something else.

Forum member 'Giant" is wishing to sell his black JDM, it is a caged car with forged engine, upgraded box, consult, everything though. Probably not what you're looking for if you're cross shopping with the Haitch eSs Vees though I dare say.

The only reason i am going for a JDM instead of a ADM is due to my budget. Unless someone is willing to sell their ADM at JDM prices i dont think i could be thinking about ADMs.  Just test drove a 2010 M3, very nice car but pretty much a wank factor. If i cant get my hands on a decent JDM r35 i think i may just have to take the pludge on a new HSV GTS with the walkinshaw package.  400rwkw with Warrenty and anti-epa is a decent deal.

if only that JDM white r35 in QLD was black!! Call me crazy but im not the biggest fan about changing the paint colour of a 100,000 car. Much rather keep it the standard colour.

Edited by Jap_Muscle

Yes painting one would be a big hassle I agree. None of the R35s advertised are moving.

I sold mine for $115000 and just got lucky with the perfect buyer. Why dont you make the

guy in NSW with the black one at $125000 a low offer? Worst he can do is say no!

M3s are nice cruise car for everyday use but that 400nm is just SO soft. I had a young buyer

test drive my tuned R35 and it scared him so he bought an M3. Soft option...........

Here is the best colour.

post-538-0-54609800-1308746285_thumb.jpg

I'm a "blue man" myself Munro, looks superb mate.

I'm so pleased they seem to have finally got the 35 where they probably really wanted it to begin with, but of course they need to keep some things from original release so they can improve :)

I read there's no issues with warranty and launching now.... is this just due to a software change that disallows it or have they actually improved the 'box strength do you know?

the warranty / launching thing disappeared AGES ago when they updated the TCM software in all the cars (effectively reducing the Launch RPM from 4,500rpm to 3,000rpm).

Interestingly the DBAR35 has a higher launch rpm again though.

yeah look at giants car for sure. i mean it's a bit hardcore for a daily with cage etc but all very nicely done and bullet proof now. I know the history of it too. he bought it off me. :) it was brand new, I bought it from a dealer in kokura, kyushu japan, shipped to aus still brand new with less than 80kms on it, still wrapped in plastic and Russ has been the only aus owner and has upgraded the hell out of it. it goes like the clappers now.

oh, and it's BLACK!

can't find Russ's on the web, but pm 'giant' on this forum. it's his car.

I did find Quins car though. even better it's an ADM, has some gear on it and he's asking $95K. I'd snap it up if I were you. it's also black. :)http://www.my105.com/ListingDetails/tabid/65/p/1/k/R35/sid/4/id/4960/Default.aspx

can't find Russ's on the web, but pm 'giant' on this forum. it's his car.

I did find Quins car though. even better it's an ADM, has some gear on it and he's asking $95K. I'd snap it up if I were you. it's also black. :)

Damn, Voicemail lol.

hopefully im not to late. You just opened the flood gates Richard lol.

:blush: maybe quinn will give me a commission?! or maybe you will for saving you dough!? haha, it certainly is keenly priced. hope you get it mate. it's ADM for the price of a race only JDM. not to mention it being a targa winning car this year. should still be pretty fresh. I can't think of a better car for $95K.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...