Jump to content
SAU Community

1989 R32 Gts4 Cant Open Fuel Filler! Help Please!

s213b

By s213b,
in General Maintenance

 Share

Recommended Posts

s213b Rising Star

s213b

Posted
Posted

as title says, i have a (had it for a month) 1989 r32 gts4 skyline, and cant f*ucking drive it because i cant open the panel that is ment to spring open when pushing the lever.

ive had a look as well as i can (race seats dont make shit easy) and the latch moves and has a rod connected to it etc etc. however to open my tank you have to push the lever down, lever seems dodgy however has worked many times.

i popped my boot and tried to see if i there was anything looking out of wack, but the whole cars dynomatted so cant see squat.

please help! if i dont get it fixed i cant fill up and get to work!!! aarrgghhh

thanks,

Josh.

s213b Rising Star

s213b

Posted
  • Author
Posted

From in the boot, reach around Near the fuel flap and feel the cable, follow it to the filler flap release, have a fiddle with it and it should open

[/quote

thanks, i found that except i dont want to have to do that everytime i fill up, is there some sort of way i can adjust it?

cheers

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

Take the drivers seat out and then see if it works correctly.

From in the boot, reach around Near the fuel flap and feel the cable, follow it to the filler flap release, have a fiddle with it and it should open

thanks, i found that except i dont want to have to do that everytime i fill up, is there some sort of way i can adjust it?

cheers

s213b Rising Star

s213b

Posted
  • Author
Posted

Take the drivers seat out and then see if it works correctly.

the mechanism works, however the little pin that lets go of the fuel flap doesnt quite go in far enough, it doesnt allow the flap to spring out. it needs adjustment or some sort, but i need to know where i can/if its adjustable.

thanks for the help guys :)

GTR-N1 Grand Master

GTR-N1

Posted
Posted

on the actual flap there is a piece of metal that catches on the latch. just push it away from the latch to get you by.

Correct, you just move the metal catch a fraction. This is not uncommon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...