Jump to content
SAU Community

Just Got An Interesting Call From Advan

SargeRX8

By SargeRX8,
in General Maintenance

 Share

Recommended Posts

SargeRX8 Grand Master

SargeRX8

Posted
Posted

My car is down at the tuners(yay) and got a call at 8:47am today. I asked them to fit my injectors on and change my fuel filter. I was then asked what fuel did I use. I said 98 Vortex. He said are you sure its not E10? I'm like dead set 100%, Ive got the receipt. Then he said the fuel is clear and not the usual colour of 98. This scared me and also made me angry as I have been filling up at the station down the road for ages. He said don't worry we will test the fuel to make sure it is what it is and if there are any issues we will call you back. I still haven't(and hope not to) got a call back.

Would it be fair to say that with the small amount of fuel trickling from the fuel line is not enough to see its colour? Ive had fuel squirt here and there before(when changing the pump) and it has always looked clear. Only when taking a large amount did it get that yellowish tinge to it. If it does turn out to be E10 fuel, I am really going to lose my temper at this petrol station and demand compensation. Ive got receipts and when you test fuel I am sure it can be traced to the supplier of the fuel.

Will this petrol station be held responsible if it is in actual fact E10 fuel coming out of the Vortex 98 tank?

Is my theory likely? That in small amounts its not enough to show colour? I also never thought E10 was clear, fuel has always been coloured(Its dyed apparently). Any input or comments are welcome.

VNS 24 Mentor

VNS 24

Posted
Posted

My car is down at the tuners(yay) and got a call at 8:47am today. I asked them to fit my injectors on and change my fuel filter. I was then asked what fuel did I use. I said 98 Vortex. He said are you sure its not E10? I'm like dead set 100%, Ive got the receipt. Then he said the fuel is clear and not the usual colour of 98. This scared me and also made me angry as I have been filling up at the station down the road for ages. He said don't worry we will test the fuel to make sure it is what it is and if there are any issues we will call you back. I still haven't(and hope not to) got a call back.

Would it be fair to say that with the small amount of fuel trickling from the fuel line is not enough to see its colour? Ive had fuel squirt here and there before(when changing the pump) and it has always looked clear. Only when taking a large amount did it get that yellowish tinge to it. If it does turn out to be E10 fuel, I am really going to lose my temper at this petrol station and demand compensation. Ive got receipts and when you test fuel I am sure it can be traced to the supplier of the fuel.

Will this petrol station be held responsible if it is in actual fact E10 fuel coming out of the Vortex 98 tank?

Is my theory likely? That in small amounts its not enough to show colour? I also never thought E10 was clear, fuel has always been coloured(Its dyed apparently). Any input or comments are welcome.

Yeah, I am pretty sure you can sue the station and its name with the consumers rights. They advertised it as 98, so there's no reason for E10 fuel to be there, unless you used some other service station.

Good luck.

I thought Advan sold wheels and tyres? xD

Probably he meant his tuner shop name.

SargeRX8 Grand Master

SargeRX8

Posted
  • Author
Posted

Advan Performance not Advan wheels lol.

Well I haven't got a call back and I was just looking at the fuel in our can down stairs(98 and 91). In small amounts they look identical. Hopefully all is fine because I really don't want to have to do anything more.

Cassbo Grand Master

Cassbo

Posted
Posted

My brother changed his fuel filter in his EVO a few weeks ago, the Caltex 98 that leaked out was a clear/yellowish colour.

I don't know how one can tell the octane of a fuel by the colour... I had the understanding that petrol was colourless until additives were added to it.

Duncan Grand Master

Duncan

Posted
Posted

Sure did....

They really need to run it up on a dyno, the timing that 98 can take vs 91 will make it immediately obvious.

I got a bad batch of fuel that almost destroyed a brand new motor...and Shell stonewalled me. Their "investigation" found no issue. And as I didn't suffer financial loss, Fair Trading had no interest

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan · Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • Duncan
      Oil pan for RB25DET NEO Stagea "version"

      By Duncan · Posted

      meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
    • MBS206
      Starting again

      By MBS206 · Posted

      I can donate $100 to your upgrade fund. So long as you can donate the IC7 my way....
    • MBS206
      Starting again

      By MBS206 · Posted

      I'd love a Haltech ECU, and Haltech 10 dash. Was having a chat with Rob and Andy @ Haltech when Rob put one in his MR2. First one I'm kind of interested in too, as you can dim it RIGHT down. Andy was saying bright dashes is one of his peeves too!
×
×
  • Create New...