Jump to content
SAU Community

Recommended Posts

Just wondering what everyones heart rate is when at moderate training and at maximum effort

If im doing a 5KM run @ 9.5KM thats a moderate run for me. My heart rate will sit at about 160

At full tilt with sweat pouring off my face at 100% my heart rate would be about 195. For me this is a 5km run at about 12.5 KMS.

21 Years of age =)

Data taken from my heart rate monitor for my last run (5.33km, 12.3 km/h 26mins 3.5sec) tells me my average heart rate for the run was 168, with a max of 179. That's probably an 80-90% work out for me at my current fitness. At the start of the year I managed to get my heart rate over it's theoretical max, but being 35 years old it's not that hard to do lol.

While it's good to know your workout heart rate to make sure you are in the right zone, 2 things that I think are just as important as your workout heart rate are your resting heart rate and how long it takes for you to get back down to a resting rate after your workout. For example my resting heart rate is about 70, and within 5 mins of the end of a run my heart rate has gone from 180ish at the end of the run back down to about 100.

  • 2 weeks later...

my resting heartrate which gets tested every 3 months when i give blood is 51-53. when i used to smoke my resting rate was around 70. the only time i have tested my heartrate during exersize was on a treadmill after quitting smoking at around 70-80%. would be up around 160 in no time at all and my chest would be on fire.

Running with interval between 10kmh and 13kmh I hit about 170 and gain 1bpm per km I run...max I'd possibly hit though is 178

Normal resting is 58bpm, but if I relax can drop it 50 easy

  • 4 weeks later...

220-age gives max heart rate (MHR), max heart rate - resting heart rate (RHR) gives you heart rate reserve (HRR), to find training heart rate (THR) is (hrr x training percentage/100) plus resting hr

eg. Resting hr is 54, age is 23

MHR is 220-23 = 197

HRR is 197-54 = 143

50% THR is (143x.5)+54 = 125.5

Using that is a good way to set training intensity goals for a cardio workout eg. Warmup 40-60%, session intervals of 50-80% cooldown 60-40%. I have the intensity guidelines for muscular endurance, strength and hypertrophy (increase size) if anyone is interested in those. I agree with what emtea said, pay attention to how long it takes to get back down to normal, adequate recovery time will allow you to train at higher intensity for longer :-)

Trozzle, let me write you a program :-) lol I need PT Guinnea cops for my last assessment

haha I would Mel, but I'm in the gym for aesthetics - size, and some strength. Not to lose fat or build stamina....lol so I'm already following something Birds has done up for me.

When I wanna get my fitness back up to where it was, I'll hit you up perhaps :P

  • 3 months later...

220-age gives max heart rate (MHR), max heart rate - resting heart rate (RHR) gives you heart rate reserve (HRR), to find training heart rate (THR) is (hrr x training percentage/100) plus resting hr

eg. Resting hr is 54, age is 23

MHR is 220-23 = 197

HRR is 197-54 = 143

50% THR is (143x.5)+54 = 125.5

Shame about it having no basis in science. Using Karvonen gives it a little individuality but it can be off by +/- 20 bpm or more.

But you probably have to use it.

  • 2 months later...

I'm 23, last night my HR running on an incline at 10.5 km/h reached 190,

For the flat it sits at 180-182 at the same speed.

Resting this morning it was 57 BMP

In the gym it has so far peaked at 213.... which is kind of not what that calculation says :unsure: So I don't know what my MHR is yet! Just going to wait until I pass out :turned:

Whoops... just realised this is an old thread -_-

Edited by JEPPE

My heart rate is high in the rev range (from the heart rate monitor on the treadmill and eliptical trainer).

I'm probably rated as "un-fit"

Going hard I can easily reach 185bpm. Going all out I've hit 200bpm - with sweat gushing from every pore.

Heart rate is usually at the gym is around 175~180bpm

My work colleague is much bigger than me (obese) but much more fit hits only 150bpm, barely breaks a sweat.

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • FWIW, I've aerated oil, and cams snapped. You can figure out the rest 🥲
    • Depending on the hose, sometimes engine out is the easiest option  
    • Get an inspection camera up there. 
    • Yeah, but look at the margin in viscosity between the 40 and the 60 at 125°C. It is not very large. It is the difference between 7 and 11 cP. Compare that to the viscosity at only 90°C. The viscosity axis is logarithmic. The numbers at 90 are ~15 and ~35. That is about half for the 40 wt oil and <half for the 60. You give up viscosity EXPONENTIALLY as temperature rises. Literally. That is why I declare thicker oil to be a bandaid, and a brittle one at that. Keep the oil temperature under about 110°C and you should be better off.   Having said all of that, which remains true as a general principle, if you have indeed lost enough oil from the sump that the pump was seeing slightly aerated oil, then all bets are off. That would of course cause oil pressure to collapse. And 35 psi is a collapse given what you were doing to the engine. Especially if the oil was that hot and viscosity had also collapsed. And I would put money on rod or main bearings being the source of the any noise that registered as knock. Hydraulic lifters should be able to cope with the hotter oil and lower pressure enough to prvent too much high frequency noise, although I am willing to admit it could be the source.
×
×
  • Create New...