Jump to content
SAU Community

Recommended Posts

Don't thnk the traction control would help if anything it would make it worse.

In my R34 when the TCS kicks in it cuts power for a good second or so. So if it happened whilst he was on a steep driveay he wild just be sliding down slowly down the driveway :)

I only gave it some AFTER goin up a car length from flat area, then it started wheelspinning and not goin up, so i freak out n apply more gas hehe- and effectively doin a burnout!

Driving style in my opinion.

You didn't think to try get a slow roll happening before you hit the driveway?

& also did you try letting the clutch out with no throttle, getting a tiny little roll-on, or at least loading the driveline, then gently accelerating?

545nm, a wet 30 degree slope and no traction control. Yep, that'd do it.

+1

Did you try getting a little headstart? Reversing back then going at it hard?

"Get a bigger hammer" comes to mind..

Maybe you got a point, WLSPN, you could be right, I didn,t do those things, to the guy below you, VONCINA, ha ha yeah I tried that of course, all I got was massive wheelspin and burning rubber lol...

sounds like driving style is playing a bit of a part in it, and the stiff suspension may be playing a part if it isn't a smooth transition from flat to steep, mainly if you have to take it at an angle as the inside wheel probably has bugger all weight on it. a mate of mine had a ceffy where if you jacked up a front wheel the rear wheel on the same side would come off the ground it was so stiff.

was it spinning both wheels, or just one? if both then it is a diff issue as it isn't engaging the LSD. not saying that the diff is shagged, but it is worn.

to be honest, the tida should've had the most problems going up being fwd. all the weight would be over the rear wheels and the front wheels would be light. there is one intersection in town on a steep hill and if you try to take of with any sort of haste in a fwd it will spin the wheels. in a rwd car you can take off fast easily.

my advice would be to simply idle up it with bugger all throttle. keeping it off boost will drastically reduce the chance of wheelspin and it will be putting out much less torque than the lexus would be. if it still whelspins then it is your suspension and your diff.

If you were trying to go up slowly, then its not rpm or torque, because you regulate that with the clutch. Still suspension will definitely be a problem, as it will significantly un-weight one wheel, in which case you really need a working LSD to get any forward movement.

Any idea if both wheels were spinning or just one?

Don't know about that, my mate who was outside watching pointed out that the left rear wheel (outside of the curved driveway) was spinning but that was because he couldnt see the right inner wheel from his standpoint. I dont think its the diff/LSD because my car had straightened itself up on the straight part of the terrible slope and then wheelspinning like crazy. Which means both rear wheels getting equal grip at that time..

By the way my turbo kicks in around 2500rpm when it sees positive boost psi, by 2800-3000rpms it is at 12psi. Around 2500-3000rpms is what I would have been doing going up the slope after it started losing traction completely.... I would have driven in at 2-2500, it slipped, and then gone to 3000rpms and up to keep it from rolling back - but it never rolled back,. With the handbrake on and the car angled up the slope, I let the clutch out normally and throttle would have been 2500 and up - and massive wheelspin without movement.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...