R32 Gtst And Other Parts

[Kisuu_Buta]

Big thread update for 2013

All prices are before postage, bigger items can be sent with courier. Items are located in Brisbane.

Sparco Pro 2000 seat, black in colour. Never been used other than trial fitting. Comes in original plastic and box. $700

Bride RH seat rail, suits R32.33.34GTR. Has N303 on its sticker. $250 Can do a deal with rail and seat together.

Apexi Power FC to suit S1 RB25 and wiring loom for RB25 into R32 conversion. No commander. (Tuned for 35R and 550cc injectors, 380whp) $800

Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in $500

Z32 80mm Airflow meter (with free Apexi air filter) $160 Cheap!

Trust/GReddy RB25 stainless manifold. $400

Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. $130

Oil Cooler kit from Old HEL group buy. Is missing the Setrab core. $300

Oil cooler core, 9 Row with dash ten fittings. Came from Trust oil cooler kit. Looks weathered/old. No leaks when removed. $50

(Could be used with above kit with adapters for smaller fittings).

R32 (GTST/GTR) Hicas lock bar with the rack ends and new genuine ball joints for the knuckle. $120

R32 Type M front bumper (white), in fair condition. Has had both corners repaired $100

Mesh from R32 GTR bumper. $10

Z32 5 spoke, 16x7.5" wheels (old tyres). $40 Cheaper than tyres!

Riverside Mesh wheels, 16x8 +1. No tyres $280

Set of 4 'Guigarro Design' 2 piece. 16X8, 16X8.5 (5x114.3) (exact offsets between +35 and +45). The offsets marked on the rim may be inaccurate).

Good condition, only two have centre caps. (The 8.5's will not fit on the back of a R32 gtst they foul where the hicas tie rod end attaches to the rear knuckle.

They also will not fit the front because the front calipers). $300

Wheel spacers to suit (Mazda, Toyota, Honda) m12x1.5 thread 20mm. $50

Sparco Bonnet pins, still in packet. $20 Cheap!

Pics of some items posted earlier in thread. New items pics on request. All prices have some negotiation. Contact by PM or SMS 0432227533. Thanks!

Edited June 10, 2013 by Kisuu_Buta

[Kisuu_Buta]

Bump.

Mesh for the GTR front bumper sold!

[Lion Chaser]

Wing gone I take it.

[Kisuu_Buta]

BUMP - Offers welcome. PM or message me for pictures. Lots of great gear here!

[Kisuu_Buta]

All prices are before postage, bigger items can be sent with courier. Items are located in Brisbane.

Sparco Pro 2000 seat, black in colour. Never been used other than trial fitting. Comes in original plastic and box. $650

Bride RH seat rail, suits R32.33.34GTR. Has N303 on its sticker. $200 Can do a deal with rail and seat together.

Apexi Power FC to suit S1 RB25. No commander. (Tuned for 35R and 550cc injectors, 380whp) $600

Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in $450

Z32 80mm Airflow meter (with free Apexi air filter) $160 Cheap!

Trust/GReddy RB25 stainless manifold. $350

Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. $100

Oil Cooler kit from Old HEL group buy. Is missing the Setrab core. $200

Oil cooler core, 9 Row with dash ten fittings. Came from Trust oil cooler kit. Looks weathered/old. No leaks when removed. $50

(Could be used with above kit with adapters for smaller fittings).

R32 (GTST/GTR) Hicas lock bar with the rack ends and new genuine ball joints for the knuckle. $120

R32 Type M front bumper (white), in fair condition. Has had both corners repaired $100

Mesh from R32 GTR bumper. $10

Z32 5 spoke, 16x7.5" wheels (old tyres). $40 Cheaper than tyres!

Riverside Mesh wheels, 16x8 +1. No tyres $250

Set of 4 'Guigarro Design' 2 piece. 16X8, 16X8.5 (5x114.3) (exact offsets between +35 and +45). The offsets marked on the rim may be inaccurate).

Good condition, only two have centre caps. (The 8.5's will not fit on the back of a R32 gtst they foul where the hicas tie rod end attaches to the rear knuckle.

They also will not fit the front because the front calipers). $250

Wheel spacers to suit (Mazda, Toyota, Honda) m12x1.5 thread 20mm. $50

Sparco Bonnet pins, still in packet. $20 Cheap!

Pics of some items posted earlier in thread. New items pics on request. All prices have some negotiation. Contact by PM or SMS 0432227533. Thanks!

MOST PRICES HAVE BEEN DROPPED IN THE INTEREST OF SELLING ITEMS!!!!!! Offers welcome!

[Kisuu_Buta]

BUMP IT UP!

[Kisuu_Buta]

BUMP - Come and spend some Tax money!!! Make an offer!

[Kisuu_Buta]

Bump it back up for August. Still got plenty of great stuff for sale, offers welcome!

Spacers sold!

Edited August 20, 2013 by Kisuu_Buta

[Kisuu_Buta]

Need to sell old parts.

Prices lowered again...

All prices are before postage, bigger items can be sent with courier. Items are located in Brisbane.

Sparco Pro 2000 seat, black in colour. Never been used other than trial fitting. Comes in original plastic and box. $700 NOW $500

Bride RH seat rail, suits R32.33.34GTR. Has N303 on its sticker. $250 Can do a deal with rail and seat together. NOW $150

Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in $500 NOW $450

Z32 80mm Airflow meter (with free Apexi air filter) $160 Cheap!

Trust/GReddy RB25 stainless manifold. $300 NOW $200

Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. $130 NOW $80

Oil Cooler kit from Old HEL group buy. Is missing the Setrab core. $300 NOW $200

Oil cooler core, 9 Row with dash ten fittings. Came from Trust oil cooler kit. Looks weathered/old. No leaks when removed. $50 NOW $40

(Could be used with above kit with adapters for smaller fittings).

R32 (GTST/GTR) Hicas lock bar with the rack ends and new genuine ball joints for the knuckle. $120 NOW $80

R32 Type M front bumper (white), in fair condition. Has had both corners repaired $100

Mesh from R32 GTR bumper. $10

Z32 5 spoke pair, 16x7.5" wheels (old tyres). $40 Cheaper than tyres!

Riverside Mesh wheels (pair), 16x8 +1. No tyres $280

Set of 4 'Guigarro Design' 2 piece. 16X8, 16X8.5 (5x114.3) (exact offsets between +35 and +45). The offsets marked on the rim may be inaccurate).

Good condition, only two have centre caps. (The 8.5's will not fit on the back of a R32 gtst they foul where the hicas tie rod end attaches to the rear knuckle.

They also will not fit the front because the front calipers). $300

Sparco Bonnet pins, still in packet. $20 Sooo Cheap!

Pics of some items posted earlier in thread. New items pics on request. All prices have some negotiation. Contact by PM or SMS 0432227533. Thanks!

[Strick.]

Sent you a PM

[zephyro90]

You selling these parts?

2door power window motor

ignition barrel plastic ring

indicator stalk or turn/bright switch

power window switch Left

quarter glass, with intact rubber molding

[Kisuu_Buta]

All prices are before postage, bigger items can be sent with courier. Items are located in Brisbane.

Some more items have recently sold, grab a bargain while its here. All reasonable offers considered!

Sparco Pro 2000 seat, black in colour. Never been used other than trial fitting. Comes in original plastic and box. $700 NOW $500 SOLD

Bride RH seat rail, suits R32.33.34GTR. Has N303 on its sticker. $250 Can do a deal with rail and seat together. NOW $150 SOLD

Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. was $130 NOW JUST $50

Oil Cooler kit from Old HEL group buy. (Is missing the Setrab core). Comes with oil filter adapter, braided lines and fittings. was $300 NOW $150

Oil cooler core, 9 Row with dash ten fittings. Came from Trust oil cooler kit. Looks weathered/old. No leaks when removed. was $50 NOW $10

(Could be used with above kit with adapters for smaller fittings).

R32 (GTST/GTR) Hicas lock bar with the rack ends and new genuine ball joints for the knuckle. $120 NOW $80 SOLD

R32 Type M front bumper (white), in fair condition. Has had both corners repaired NOW $50

Z32 5 spoke pair, 16x7.5" wheels (old but legal 205/55 R16 tyres). $40 Cheaper than tyres!

Riverside Mesh wheels (pair), 16x8 +1. No tyres $280 NOW $200

Set of 4 'Guigarro Design' 2 piece. 16X8, 16X8.5 (5x114.3) (exact offsets between +35 and +45). The offsets marked on the rim may be inaccurate).

Good condition, only two have centre caps. (The 8.5's will not fit on the back of a R32 gtst they foul where the hicas tie rod end attaches to the rear knuckle.

They also will not fit the front because the front calipers). was $300 NOW $200

Pics of some items posted earlier in thread. New items pics on request. All prices have some negotiation. Contact by PM or SMS 0432227533. Thanks!

[Kisuu_Buta]

Friday night bump!

[Kisuu_Buta]

Items are located in Brisbane. All prices are before postage, bigger items can be sent with courier.

All reasonable offers considered!

***** Set of EBC Redstuff Front and Rear pads. (Bought wrong pads for my car. Didn't check on vehicle before returns period expired! My loss is your gain). ***** $250 posted (If you find cheaper will beat!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition no damage. **** $100 for both

***** Varex oval style rear muffler with controller and remote. Used for 6 months. Has rear flange. Will need new mounts welded on for indivdual car. **** $350 Offers?

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $50

***** Oil Cooler kit from Old HEL group buy. (Missing the Setrab core). Comes with oil filter adapter, braided lines and fittings. ****** $100

***** Oil cooler core, 9 Row with dash ten fittings. Came from Trust oil cooler kit. Looks weathered/old. No leaks when removed. ***** $10

(Could be used with above kit with adapters for smaller fittings).

***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** $50

***** Riverside Mesh wheels (pair), 16x8 +1. No tyres ***** $280 $200

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. FREE

Make an offer on parts, if paying cash bargains to be had! Contact by PM or SMS 0432227533. Thanks! :yes:

Edited December 24, 2013 by Kisuu_Buta

[Damor3387]

Hi mate I'll take the oil cooler can you post to albury 2641

[Kisuu_Buta]

OFFERS OFFERS OFFERS OFFERS OFFERS OFFERS OFFERS OFFERS OFFERS OFFERS OFFERS OFFERS OFFERS OFFERS? Friday bump!

[Kisuu_Buta]

BUMP - would love to sell this stuff. Will let it go for very cheap!

[Kisuu_Buta]

Due to new part arriving soon, I need to sell all of my old gear. Photo's can be sent to email or Mob. Offers welcome!

[Kisuu_Buta]

Items are located in Brisbane. All prices are before postage, bigger items can be sent with courier.

All reasonable offers considered!

***** Set of EBC Redstuff Front and Rear pads. (Bought wrong pads for my car. Didn't check on vehicle before returns period expired! My loss is your gain). ***** $250 posted (If you find cheaper will beat!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######

(Photo available on request)

***** R33 Lower control arms, have been professionally boxed with dimpled sheet metal. (Require paint/powdercoating) ***** $180

(Photo available on request)

***** Offset steering rack spacers, great for extra steering lock when drifting etc.***** $50

(Photo available on request)

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition no damage. **** $50 for both!

(Photo available on request)

***** Varex (oval type) rear muffler with controller and remote. Used for 6 months. Has rear flange. Will need new mounts welded on for indivdual car. **** $300

(Photo available on request)

***** Apexi Power FC to suit S1. No commander. (Tuned for 35R and 550cc injectors, 380whp) WAS $800 now $650

***** Z32 80mm Airflow meter (with free apexi air filter) WAS $160 NOW $120

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $50

(Photo available on request)

*****Trust/GReddy RB25 stainless manifold. ***** $300 NOW $200

(Photo available on request)

***** Oil Cooler kit from Old HEL group buy. (Missing the Setrab core). Comes with oil filter adapter, braided lines and fittings. ****** $100

***** Oil cooler core, 9 Row with dash ten fittings. Came from Trust oil cooler kit. Looks weathered/old. No leaks when removed. ***** $10

(Could be used with above kit with adapters for smaller fittings).

***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** $50

***** Riverside Mesh wheels (pair), 16x8 +1. No tyres ***** $280 $200

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. FREE

(Photo available on request)

Really need to sell these parts, just collecting dust! Contact by PM or SMS 0432227533. Thanks! :yes:

[Kisuu_Buta]

Some interest, but no buyers!!! Make an offer, these parts need to go!