Jump to content
SAU Community

Recommended Posts

Hi all... i have conducted a TRUE comparison between the two turbos thanks to Sonic Performance and Garage 7. By true comparison i mean the only thing changed was the turbo. nothing else was touched. The result was suprising and disappointing both at the same time. We found that the GTX version DID spool quicker and hence started making torque and power earlier in the midrange. i now have FULL boost around the 3500 rpm mark which for a turbo like that is impressive. Its highly streetable!

The downside is that for the same boost level peak power is changed by .1 of a kw! its pretty much lineball! the two turbos match each other on the graph pretty much spot on.

runs were done with air temp probe and same correction mode and dyno that STatus uses for real world comparison.

Heres the pics.

Solid pink line is GTX, thin red line is GT.

p1020473s.jpg

p1020471v.jpg

  • Replies 101
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Question:, is running the GTX at the same boost pressure as the other turbo a true 'fair' comparison? I mean... for example if your comparing a gt2871 with a gt4088 you don't leave them at the same boost.

It's interesting to see it ramp hard @ 3500rpm.

And then @ 4000rpm the GTX suddenly stops making power almost as if it's hitting surge. Was that just a case of the tune?

(ie back to back test, no tune adjust?)

Also interesting that its more responsive when other results all seem to show the opposite thus far.

Question:, is running the GTX at the same boost pressure as the other turbo a true 'fair' comparison? I mean... for example if your comparing a gt2871 with a gt4088 you don't leave them at the same boost.

what do you want me to do? run less or more boost?

i feel same boost level should give a truer comparison yes?

Lithium: no tuning.. was just run up. Declan ran out of time on the dyno but the AFR's were the same as before so its still fine.

It's interesting to see it ramp hard @ 3500rpm.

And then @ 4000rpm the GTX suddenly stops making power almost as if it's hitting surge. Was that just a case of the tune?

(ie back to back test, no tune adjust?)

Also interesting that its more responsive when other results all seem to show the opposite thus far.

yeah it probably needs a degree or two added in one part of the map to bring it back inline. this could be due to different airflow charactoristics of the two turbos.

i have seen other peoples results.. but they often have changed other things in their set ups which couldn potentially cause issues. as i said mine is a back to back. use the info as you please.

If the new turbo can flow more than the old one then potentially without raising the boost and/or adjusting the tune to maximize the new found goodness then potentially not really telling of the real difference. That result suggests to me the old turbo had more on it too...

If it didnt nose over hard, it would be looking to pickup a solid ~40kw @ 4500rpm.

Now that would be very interesting indeed.

Good to see a 18psi comparo too where most comparo's have been on 20-24psi for the most part.

Perhaps with more boost the differential between the two would be more noticeable.

Its a good comparison in that most cars are probably only going to run around this level of boost but this result is exactly what I would expect - apart from earlier spool. If you had of reved it to 7500rpm you may have actually seen some results.

I just dont know why you guys are so dissapointed - you only need to compare the compressor maps to see that there are f**k all gains unless your running around 2bar of boost with the gtx.

PS what type of engine management?

Been waiting for this.....the next step is to tune/map for the GTX but don't lift the boost. I reckon the ramp up will likely maintain its margin over the GT a bit better throughout the rev range . But I have a sneaking suspicion that the peak power [for 18psi] will be very similar.

But the GTX would be a lively package on the street, an extra 30rwkw at 3500!!! I'm almost tempted to sell my GT and try one [but I have other plans involving a dirty 30, so this challenge is not for me].

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...