Jump to content
SAU Community

Recommended Posts

anyone with M35 has bought any reinforcement braces (not sway bars)? if yes, do they actually improve handling or at the least work as it's supposed to?

something like this: http://www.oxmotorsports.co.jp/7.html?

damn expensive pinch.gif

Iain has em on his car....pretty sure he was happy with the result....although we did do the BC + Sway bars at the same time!

  • Replies 193
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i have them

and yes they help. well, i assume so.

i did them, swaybars and coilovers all at once.

anyway the chassis creaks less now when i go in and out of my driveway at an angle...........

is that actually chassis flex?

i assumed it was just the movement of the swaybar. and the creak was nil lube in there.

are they actually the same as the whiteline sway bars in dale's group buy? i'd like to get the front and rear strut bars, but are the others sway bars or additional braces?

completely different!

the bracing stops chassis flex and adds rigidity. the sway bars prevent body roll.

get both, failig that, just get the swaybars

of course, its metal!

jack up one corner and open a door

my car creaks when i park on uneven surface and climb into the rear seats from 1 side

i thought it was swaybars that ran out of grease or just worn bushings

of course, its metal!

jack up one corner and open a door

speaking about creaks, my car creaks a lot on turns and even when rolling slowly on a slightly uneven surface...is it normal or something that i need to look at?

old and dry bushes is probably all it is. unless your car is doing something weird, i wouldnt worry too much about it.

mines done it since i got it. i thought changing the suspension and swaybars would fix it. but the creaks are coming from elsewhere. maybe ill throw some lithium grease around one day

guys, more questions

1. i saw a DIY 1 day on changing the shifting direction for the manual but can't find it anymore, any links and photos on how to do it?

2. looking to change brakes, i know there are a couple (or more) threads for brake upgrade, but just want to get a quick and straight answer: does R34 GTT brakes (f&r) fit M35 and what do i need other than the caliper and corresponding rotors and pads?

3. anyone know how to raise up the HID headlight beam? i need to raise up the left one as it's not as high as the right onepinch.gif

4. continuing on the headlights, anyone know what bulbs we're using for the HID and also for the other light (the yellow one)? thinking of getting a super yellow light and a higher K HIDwhistling.gif

thanks guys thumbsup.gif

guys, more questions

1. i saw a DIY 1 day on changing the shifting direction for the manual but can't find it anymore, any links and photos on how to do it?

2. looking to change brakes, i know there are a couple (or more) threads for brake upgrade, but just want to get a quick and straight answer: does R34 GTT brakes (f&r) fit M35 and what do i need other than the caliper and corresponding rotors and pads?

3. anyone know how to raise up the HID headlight beam? i need to raise up the left one as it's not as high as the right onepinch.gif

4. continuing on the headlights, anyone know what bulbs we're using for the HID and also for the other light (the yellow one)? thinking of getting a super yellow light and a higher K HIDwhistling.gif

thanks guys thumbsup.gif

1; http://www.skylinesa...5+shift+reverse

2; Fronts will go straight on; rears as far as I'm aware no one has tried. V35/Z33 brembo rears will.

3; There will be a manual trim adjustment; I would suggest removing the bumper skin and removing the headlight itself; easier than trying to muck around in the engine bay. With a little practice you can remove the bumper skin in less than 10 minutes.

Also check that the adjustment servos are both working; this could be the root cause.

4; 4200k D2R's are factory , so you could step up to a 6000k without going too silly. I believe iamhe77 is using 90/110w halogen globes in the high beam slots with no added relays; with no issues.

Edited by Daleo

1; http://www.skylinesa...5+shift+reverse

2; Fronts will go straight on; rears as far as I'm aware no one has tried. V35/Z33 brembo rears will.

3; There will be a manual trim adjustment; I would suggest removing the bumper skin and removing the headlight itself; easier than trying to muck around in the engine bay. With a little practice you can remove the bumper skin in less than 10 minutes.

Also check that the adjustment servos are both working; this could be the root cause.

4; 4200k D2R's are factory , so you could step up to a 6000k without going too silly. I believe iamhe77 is using 90/110w halogen globes in the high beam slots with no added relays; with no issues.

I'm all over it Aaron :thumbsup:

and D2's for the xenon. lol replaced my $50 cheapys after two years. cant beleive they've lasted.

Edited by Daleo

i accept my fail lol.

whats wrong with 8000k? lol yeh you cant see very far but meh i dont need to see 1 km ahead of me.

Too blue; light doesn't seem to throw very far and glare reflects back at you off every road sign in the known universe.

That and you look like a stupid teenager with an Excel and some Ebay HID's yo!:yucky:

Edited by Daleo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
    • Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
×
×
  • Create New...