Jump to content
SAU Community

Recommended Posts

The rumoured Texas V8SC race is now confirmed apparently.

Not sure how I feel about this, normally I'm fairly "meh" about American circuit racing, but I'm a little excited about this. Would be great to show the Yanks how it's done!

Link to comment
https://www.sau.com.au/forums/topic/369607-v8sc-in-texas/
Share on other sites

Doubt Ambrose will be avaliable, they race somthing like 40 weekends of the year in naaaaaascaaaar. V8SC could learn a lot from that, not having to dump local rounds for overseas rounds (that no one goes to watch)

Link to comment
https://www.sau.com.au/forums/topic/369607-v8sc-in-texas/#findComment-5892071
Share on other sites

Dont you wish V8sc would just invest money here and race? sick of this company sucking the money out of the aussie racing scene..

I wish they would just f**k off and die so we could have a decent touring car championship in Australia.

Link to comment
https://www.sau.com.au/forums/topic/369607-v8sc-in-texas/#findComment-5892250
Share on other sites

The rumoured Texas V8SC race is now confirmed apparently.

Not sure how I feel about this, normally I'm fairly "meh" about American circuit racing, but I'm a little excited about this. Would be great to show the Yanks how it's done!

Nothing wrong with American Circuit stuff...would rather watch this than Supertaxis anyday

http://youtu.be/gS6JUQet5E8

Having watched some NASCAR circut (not oval) racing, i think this'll go down well with the yanks. the NASCAR's (seem) excruciatingly slow around corners, the V8's might liven it up a bit more.

They only seem slow around corners because with 850hp (sprint cup) they makes the straights look very short.

For 1500kg+ cars on skinny tyres and a rear end designed for only turning on banked left handers, they do pretty darn well in the twisties if you ask me

Link to comment
https://www.sau.com.au/forums/topic/369607-v8sc-in-texas/#findComment-5892345
Share on other sites

They only seem slow around corners because with 850hp (sprint cup) they makes the straights look very short.

For 1500kg+ cars on skinny tyres and a rear end designed for only turning on banked left handers, they do pretty darn well in the twisties if you ask me

It's a valid point though, I've often wondered how our V8s would do on a circuit against NASCAR. NASCARs do have more power, but they also have more weight, less sophisticated technology, and don't forget they're running four-speed h-pattern gearboxes. NASCARs also don't have a mandatory rev limit, they can get near 10,000 rpm on their engines. I wonder how much power they'd make if they were limited to 7500 like our V8s?

Link to comment
https://www.sau.com.au/forums/topic/369607-v8sc-in-texas/#findComment-5893028
Share on other sites

I dont know that they have more sophisticated technology, they just use technology to do different things. They are designed to turn the car left corners and sit in a constant rpm for maximum power. My little nascup car is exactly the same, it will hammer left corners faster than i can drive it but soon as i turn right it has no clue how to handle.

Link to comment
https://www.sau.com.au/forums/topic/369607-v8sc-in-texas/#findComment-5893035
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...