Jump to content
SAU Community

Recommended Posts

Is there much of a difference in Coil packs?

For a non turbo GTS 1996 skyline for daily driving?Done about 185,000km so far.

I have one starting to fail which will be replaced .

Although the others seem ok is it reasonable to replace them all.Do they wear out?

getting the mechanic to do this several times isn't cost effective but I don't know how long I can expect these to last under normal conditions.

If I could do this myself, rather than pay the mechanic, I would only replace the faulty one.

IMO you may as well replace them all. Then it is something that you don't have to worry about for a number of years....

EDIT: as the coil packs are all well aged it is now just a waiting game until the others go.

Edited by Shazza24

Like the others have said swap em out mate. Once one has gone, its probably only a matter of time (and short one at that)

I replaced one of mine and it ran well for around 2500km, then another failed. I immediately just wished i had forked out for the new ones.

You have to realize that all the coil-packs were manufactured the same, and now have done the same number of km's under the same conditions, and are all equally as worn out as each other, as one has failed, you can guarantee that the rest are on their way out. Replace the lot, and fit god plugs while you're there. Otherwise, it'll end up costing you more to have them replaced one by one, and fuel economy etc.

Mines run about 93,000 kms and one has now failed, on my car at least, the coilpacks are rather hard to access (thats what my mechanic told me) and if one fails, and you fix it, and another fails, then the labour costs will be alot just to replace one again so its a much safer idea just to replace em all :)

Mines run about 93,000 kms and one has now failed, on my car at least, the coilpacks are rather hard to access (thats what my mechanic told me) and if one fails, and you fix it, and another fails, then the labour costs will be alot just to replace one again so its a much safer idea just to replace em all :)

Thats gotta suck for plug changes etc too! Must be an r34 thing, the 33 (series 2) is a ridiculously easy job.

it's really not that hard to get to your coilpacks on an r34. just sounds like a good excuse for your mechanic to butter you up for an expensive bill

i just bought my r34 and have been pretty disappointed so far with things i've found so far on a car that was owned by a guy that had it straight to a mechanic for any little thing, not to mention basic oil and plug changes.

protip: learn how to do basic things yourself

it's really not that hard to get to your coilpacks on an r34. just sounds like a good excuse for your mechanic to butter you up for an expensive bill

i just bought my r34 and have been pretty disappointed so far with things i've found so far on a car that was owned by a guy that had it straight to a mechanic for any little thing, not to mention basic oil and plug changes.

protip: learn how to do basic things yourself

it's really not that hard to get to your coilpacks on an r34. just sounds like a good excuse for your mechanic to butter you up for an expensive bill

i just bought my r34 and have been pretty disappointed so far with things i've found so far on a car that was owned by a guy that had it straight to a mechanic for any little thing, not to mention basic oil and plug changes.

protip: learn how to do basic things yourself

i've heard that the sparkies and coilpacks are a bit difficult to get to on the 34s, the guy pointed it out to me and it appeared like it was under a fair bit of engine or something? Two different mechanics have both told me its a bit of a difficult job, thats why they

Im being charged about $130 bucks for the labour to get to the coilpacks ... might even just change the sparkies now cos its almost due for its 100k service so we dont have to pay for the labour to get there twice?

I really dont know much about mechanics - im trying to learn some stufff - thats why i got the sexcel :)

a few minor problems with the sexcel, gonna fix it up then move onto something else and hopefully should have a good idea and be a bit more confident to do stuff myself

hope to one day buy a blown engine and try and fix it up or something :)

get a service manual some reusable sandwitch bags an masking tape to label the bags of where to bolts belong and even go to take some photos during pulling everything of a reference. coil-packs arent too difficult, try replacing all the welsh plugs with the engine still in the car. if your after a temp fix wrap the coil-packs with good electrical tape.

its not hard doing it yourself. if you've got a bit of common sense then you'll be fine.

Re: coil packs. if you get lucky and have the coil packs with the copper inside then you can usually get away with cleaning up the surface LIGHTLY with a dremil. this worked really well for ages till i got a set of splitfires. they tend to accumulate a fair bit of crap over time.

Thanks for the replies.

I will now replace all the coil packs

for a ,R33 GTS non turbo 1996 skyline 4 door ( 180,000km )

I just drive this as the family car.

Now , which coil pack is the most reliable and what sort of cost am I looking at per coil?

If I don't go genuine replacement or should I

Thanks for the replies.

I will now replace all the coil packs

for a ,R33 GTS non turbo 1996 skyline 4 door ( 180,000km )

I just drive this as the family car.

Now , which coil pack is the most reliable and what sort of cost am I looking at per coil?

If I don't go genuine replacement or should I

well for mine genuine is MUCH cheaper, 220 bucks for the parts, 120 bucks for installation.

for an aftermarket set you're looking around the 500 - 600 bucks for the coils ...

i dont see the point paying 400 bucks more for the aftermarkets especially since yours is a family car

coil packs WILL fail if you have an R34, R33 and R32 are a different story

it's actually quite easy to get to the coilpacks and change them yourself, just takes about 4 hours if it's your first time, you'll need a socket wrench, allen keys and pliers.

DON'T make the same mistake I did and change 1 coilpack and 1000kms later, another one failed costing me an unnecessay 350dollars extra! Replace the spark plugs while you're at it too and DON'T cheap out

When the mechanic did it he put in 6 copper spark plugs and a 2nd hand coilpack

When I did it, I put in 6 new iridium spark plugs and 6 new yellow jacket coil packs, not a problem ever since!

DON'T CHEAP OUT!

EDIT: yellow jacket coilpacks are 420 dollars inc delivery (they are almost identical in performance / durability compared to spitfires)

is it worth it to buy aftermarket ones vs the stockers?

ill definitely pick up some iridium or platinum sparkies and get them fitted at the same time as the coilpacks ... id feel bad canceling now since he's already ordered the coilpacks for me and stuff. the cars almost due for its 100k service anyway so i really may as well!

is it worth it to buy aftermarket ones vs the stockers?

ill definitely pick up some iridium or platinum sparkies and get them fitted at the same time as the coilpacks ... id feel bad canceling now since he's already ordered the coilpacks for me and stuff. the cars almost due for its 100k service anyway so i really may as well!

$590 for 6spitfire coilpacks and $1272 for originals from Nissan

Bought the spitfires and seem to have noticeably more acceleration now.

Can I expect my fuel economy to stay the same if I don't change my driving habits?

Edited by samuri

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...