Jump to content
SAU Community

Recommended Posts

Ok,

The next cruise is planned for Saturday April 24th. But seeming as though there are so many destination options we thought we'd give everyone a chance to vote for where they like to cruise to next.

1. Macedon Ranges - Hanging Rock.

There are some nice easy twisties in and around Woodend, Lancefield, Kyneton, as well as some FWY cruising. And Hanging Rock has a great carpark for photo's etc.

2. Warburton - Reefton Spur.

Good set of regular twisties going through the dandenongs, c0ckatoo, along the reefton spur - then from Warburton we have the option of travelling through Mt Donabuang etc. Long driving day.

3. Peninsular - Portsea Pub.

Again a nice cruise down with a good mix of twistes through places such as Arthurs Seat, Red Hill, plus some nice stopping points like the Portsea Pub for lunch if desired and Point Leo for photo's.

4. The Moon.

Requires Special means of transport. Very long cruise.

:ufo:

Chances are we will do all these cruises at some stage this year. But if you have a preference for the next destination speak up! The desitnation will be decided by April 8th.

:)

Link to comment
https://www.sau.com.au/forums/topic/36978-april-24th-next-big-cruise/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

i also voted #1

could this be my first SAU cruise??

hey snowman and ash,

Is there any way you can put a ruff estimate of km's travelled for the different cruise options...also ruff guess of time to get then say from west gate bridge or somewhere central...as the gor was awsom but driving that long...far ..when i got home i felt like i was in a bathurst race...

hey snowman and ash,

Is there any way you can put a ruff estimate of km's travelled for the different cruise options...also ruff guess of time to get then say from west gate bridge or somewhere central...as the gor was awsom but driving that long...far ..when i got home i felt like i was in a bathurst race...

THE OAK - I'd say both the Macedon Ranges and the Peninsular are roughly an hour and a half from the city. Both cruises involve going to a certain area and then kinda driving around in circles for a while on all the fun roads (if that makes sense) - as oposed to say the GOR which is just a long drive there and back. Warburton is probably an even longer days drive than GOR if you do the mountains as well.

But the beauty of both the Macedon and Penisular cruises is that you can decide on the length of driving based upon conditions as the time gets closer. But because of their proximity to the cbd we can probably have more stops between runs rather than 4hrs of continuous driving followed by an extended break.

Hope that helps.

Just wondering, are the cruises open to anybody?

Open to anyone that wants to come along mate.

More the merrier!

OAK - We can put a rough 'total' KM's travelled, does that help you out?

ie, i'll set my trip meter from my door step and check it on return?

But that is only once we decide on a route... as we aint actually 'planned' this yet.

So it's hard to say.

That would probably be all that we could offer.

Otherwise we are just going to spend too much time organising each cruise (on a chance we might not even do it)...

hence there will be less time for us to organise more cruises for all you boys.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...