Jump to content
SAU Community

Eoi: 18X10 +18 And 18X11 -1 Stitch Evolution Wheels


Recommended Posts

Just putting these out there to see what kind of interest i get as they are a bit too aggressive to fit my supra and i dont really want to modify the gaurds as much as i would need to.

I bought these wheels with my cefiro but won't be tracking the car on them as theyre a bit too rare/expensive to risk smashing them, plus the rears wont fit under the gaurds with slicks so i will just be running some Lenso D1Rs.

They are a 3 Piece rim and are multifit 4/5 (4x114.3 and 5x114.3).

What i would like to do is swap these for something slightly less aggressive in offset (similar width in +20ish offset would be nice), or i will sell these for the right cash offer.

The gold is a bit faded and is peeling in a few spots but there is minimal rash on them and no bends/dents.

Also note i never got the center caps with these wheels but they look better without them if you ask me whistling.gif

If anyone is keen or would like to make an offer contact me through here or SMS me on 0408 117 171.

Cheers,

Daniel

post-64152-0-31586100-1309668083_thumb.jpg

post-64152-0-18179100-1309668094_thumb.jpg

post-64152-0-09071900-1309668140_thumb.jpg

post-64152-0-80467600-1309668150_thumb.jpg

Also the front tires are almost new but unmatching 235s, and the rears are 245's with approx. 30% tread left, can come with matching brand new fronts and 60% rears of the same size if any interest is there.

What are you doing with the car? drift hack? , the wheels kinda make it :unsure: . you know , if you buy d1r's, our cars are gunna be pretty close to twins >_<

Yeah they do make it >_< And nah unlikely ill drift it - club days, hill climbs maybe, drags when i feel like it.

  • 3 months later...

Bump! still thinking of selling these, have since found out they are a 2 piece and not 3, and have begun stripping the paint off the centers as the gold is peeling, looking for around 1500 as-is or 1800 painted, or will swap for some decent wheels around the 18x10 +20 mark to suit a 32 GTR

Edited by DanielH
  • 2 weeks later...

Another bump! $1300 as they sit! 1 rim has been pulled apart and had the center dipped to see how easily the paint will come off, and the other 3 are exactly as pictured.

Edited by DanielH
  • 1 month later...

Bump! all 4 rims now together, one is painted in a darker gold as a test to see if i like it, they were on my car at the last drag meeting if anyone saw the blue 32 GTR there

  • 2 months later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...