Jump to content
SAU Community

Eoi: 18X10 +18 And 18X11 -1 Stitch Evolution Wheels


Recommended Posts

Just putting these out there to see what kind of interest i get as they are a bit too aggressive to fit my supra and i dont really want to modify the gaurds as much as i would need to.

I bought these wheels with my cefiro but won't be tracking the car on them as theyre a bit too rare/expensive to risk smashing them, plus the rears wont fit under the gaurds with slicks so i will just be running some Lenso D1Rs.

They are a 3 Piece rim and are multifit 4/5 (4x114.3 and 5x114.3).

What i would like to do is swap these for something slightly less aggressive in offset (similar width in +20ish offset would be nice), or i will sell these for the right cash offer.

The gold is a bit faded and is peeling in a few spots but there is minimal rash on them and no bends/dents.

Also note i never got the center caps with these wheels but they look better without them if you ask me whistling.gif

If anyone is keen or would like to make an offer contact me through here or SMS me on 0408 117 171.

Cheers,

Daniel

post-64152-0-31586100-1309668083_thumb.jpg

post-64152-0-18179100-1309668094_thumb.jpg

post-64152-0-09071900-1309668140_thumb.jpg

post-64152-0-80467600-1309668150_thumb.jpg

Also the front tires are almost new but unmatching 235s, and the rears are 245's with approx. 30% tread left, can come with matching brand new fronts and 60% rears of the same size if any interest is there.

What are you doing with the car? drift hack? , the wheels kinda make it :unsure: . you know , if you buy d1r's, our cars are gunna be pretty close to twins >_<

Yeah they do make it >_< And nah unlikely ill drift it - club days, hill climbs maybe, drags when i feel like it.

  • 3 months later...

Bump! still thinking of selling these, have since found out they are a 2 piece and not 3, and have begun stripping the paint off the centers as the gold is peeling, looking for around 1500 as-is or 1800 painted, or will swap for some decent wheels around the 18x10 +20 mark to suit a 32 GTR

Edited by DanielH
  • 2 weeks later...

Another bump! $1300 as they sit! 1 rim has been pulled apart and had the center dipped to see how easily the paint will come off, and the other 3 are exactly as pictured.

Edited by DanielH
  • 1 month later...

Bump! all 4 rims now together, one is painted in a darker gold as a test to see if i like it, they were on my car at the last drag meeting if anyone saw the blue 32 GTR there

  • 2 months later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...