Jump to content
SAU Community

Recommended Posts

I'm looking at importing an R32 early next year before the import regulations change, so at the moment i'm doing as much research as I can into exactly what I should get. I'm still debating whether or not it's worth paying the extra amount to get a GTS4 vs a GTST.... what do you guys think? What concerns me is that if I go for a GTS4 I will have less overall vehicles available to make my choice from. Also, fuel consumption will be worse, and I'll lose more power thru the drive train, which I can't really afford on a 2.0 l engine. Would it still be worthwhile or should I stick with a GTST and get a nice one?

Any other advice or suggestions as to what to get would be gratefully accepted.

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/
Share on other sites

ionos, the 4wd system (ATTESA) is computer controlled. the car is in full rwd mode unless it is putting power to the front wheels, so dont really worry about the fuel consumption. Control the fuel consumption with your right foot.

with the gts4 you can just pull a fuse out and go rwd only (as ABU53 / LA LA does...often) and i have seen ATTESA save him and the car from, well, doom. so it can be a pretty handy thing.

gts4 is heavier, if you want to get good throttle control and like rwd, go for the gtst, if you want the different (more advanced?) driving experience ATTESA can give, go for that. if the rear starts to go you can still turn in, as power will be fed to them. drive both.

good luck big fella.

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-60843
Share on other sites

if you can get the GTS4 i would go for that. Just like a baby GTR.

Also, if you are importing, I would be careful that plates dont run out. I have heard rumours that there are less than 25 r32 plates left in victoria.. as I said , rumours tho, so i wouldnt know.

go here for a bit more info re the new scheme: http://www.prestigemotorsport.com.au/indupdates.html

dave

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-60886
Share on other sites

I may be biased but I would definitly recommend the GTST.

They are lighter and you have a greatly balanced car.

Just keep in mind that, YES, you do get better launches with the GTS4 but I am sure that the GTST would catch and pass it down a quarter.. also, there is more to life than quarter mile runs..

I think that the RWD/front engine design is still the best and has the best balance.

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61431
Share on other sites

Maybe i too am biased, but life is not all about launching the car.. once you're off the line the GTSt will kill the GTS4... big weight difference. Less stress on brakes etc with the weight of the GTSt too, tighter around the twisties too i'd wager.

For the right price, you could have my R32 GTSt :D

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61471
Share on other sites

Thanks for the advise guys! I think a gtst would be the way to go, my logic is for the extra amount that a gts4 would cost, I could get a nice gtst with a few mods, that would go just as hard. I'm driving a front wheel drive at the moment and i HATE it, just can't wait to drive a powerful rwd car again.

Now I just hope that when it comes time for me to import, there are still plates left. :D

Morgs, what do you have, and how much? :) I wouldn't mind paying a bit extra for a local sale, but all the private sales i've seen in SA want $16000 + which is an absolute joke for a r32 (in stock form).

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61474
Share on other sites

The GTS4 comes standard with 4 spot front brakes (well at least mine did) and I've driven both, owned a GTS4 for 3 years and driven various GTSt's over the time. In the dry, on the twisties, the GTSt's are slightly better. They are also slightly better on rolling start drags or overtaking due to less weight. For every other situation, the GTS4 absolutely OWNES the GTSt. Wet weather is so much better with the '4 as is any non tractable surface. I remember towing a bogged 60 series Landbruiser with my GTS4 :) I had to get him 10 meters and my car did it with style :)

Now the brakes, oh god were the 4 piston calipers with ABS bloody good. Oh yeah, all GTS4's come with ABS standard, thats very well worth considering. Problem is, if you reef the handbrake on mid corner, the ABS unlocks the back wheels and 4WD engages trying to deliver identical torque to all wheels :D

One thing I learned with the GTS4 is how to drift and stay safe. With the GTSt's it's easy to go too far and spin out, the GTS4 pulls power to the front wheels after you start drifting and you get such a wonderful sensation of drifting and knowing there's so much more room before you get to the limit. I had adjustable KYB suspension in my car and it handled brilliantly, better than most GTSt's but the GTS4 is front heavy and tends to understeer much more than the GTSt's if you aren't gently powering through the corner.

Another great memory I have of the GTS4 is tying both towing hooks at the back of the car to a tree, putting some oil under all 4 tyres, in first, smoking them all up, almost redlining at 60km/h I pushed the cruise control button, opened the door, stepped out, took a photo of the car with all 4 smoking up, jumped back in and disabled cruise control :)

I ended up selling the car, pretty much in perfect condition with 103,000km on it for $9500

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61675
Share on other sites

Argh the options. Slip mentioned that the 4wd was only engaged when the rear wheels lost traction... does that mean that you will not lower power thru the drive shaft when it is not engaged, or will you still lose more power like all 4wd's?

Also, how much heavier is the GTS4? I'm a big guy :D, and with me and the girlfriend in the car, it's gonna be a lot of extra weight on that poor 2.0 l motor.

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61704
Share on other sites

Originally posted by Bozz

Another great memory I have of the GTS4 is tying both towing hooks at the back of the car to a tree, putting some oil under all 4 tyres, in first, smoking them all up, almost redlining at 60km/h I pushed the cruise control button, opened the door, stepped out, took a photo of the car with all 4 smoking up, jumped back in and disabled cruise control :D

Baaaahahahahahahahahahahaah

Bozz - you are officially now a legend. I love your work..

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61732
Share on other sites

Originally posted by Ionos

Argh the options. Slip mentioned that the 4wd was only engaged when the rear wheels lost traction... does that mean that you will not lower power thru the drive shaft when it is not engaged, or will you still lose more power like all 4wd's?

Also, how much heavier is the GTS4? I'm a big guy :D, and with me and the girlfriend in the car, it's gonna be a lot of extra weight on that poor 2.0 l motor.

yep, u shouldnt lose power as bascially it functions like a rwd until the rear wheels start to lose traction.

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61750
Share on other sites

Regarding the Brakes on the GTS4..

The GTST type M also comes with 4 pot calipers and ABS.

Dude..

Read these 2 articles, then decide for yourself..

GTS4

GTST

Then decide for yourself.

Every person on here is going to say get this or get that because that's what they have.. this includes me.

But read up on both machines and choose for yourself after driving both.

IF you can find a GTS4...

It's pretty hard to come by one of those and when you consider that for the price that people are asking for a 90 model GTS4, you could get like a 94 R33, it's hard to go past the R32 GTST (my opinion once again..)

Good luck in your search..

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61865
Share on other sites

And that's in Japan..

So finding one in Aus let alone a good one, is next to impossible.

As for GTST's there are always some for sale..

I've seen them as low as $13K (stock and pretty average)

Up to as high as (I personally think too much) $22K for one that has the GTR body bits and good engine mods and looks and so on.

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61936
Share on other sites

Originally posted by Ionos

Morgs, what do you have, and how much? :D I wouldn't mind paying a bit extra for a local sale, but all the private sales i've seen in SA want $16000 + which is an absolute joke for a r32 (in stock form).

Its a gunmetal grey R32 GTSt, exhaust, filter, suspension, the usual mods, and pricewise looking at about $16K. Put it in the TP for $17K but mostly time wasters from there.

Link to comment
https://www.sau.com.au/forums/topic/3716-r32-gtst-vs-gts4/#findComment-61949
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...