Jump to content
SAU Community

Snow Performance Wmi

tridentt150v
 Share

Recommended Posts

JustinP Mentor

JustinP

Posted
Posted

I would also like some opinions on this same kit as I am just about to buy one! Can't decide between this or the Coolingmist GS PRO.

They both have plusses and minuses, but the Snow Performance controller just looks so much better :P

Is anyone else using one?

I've got my settings at 30-65 IDC and 8-14 psi and was wondering what others were using?

Also has anyone tried passing emissions with a WMI kit fitted?

JustinP Mentor

JustinP

Posted
Posted

I would imagine that it would actually give you a better result with an emissions test??

mine is an older kit but its set to start at 8 and flat out at 20. it was also fully operational when i passed the nsw emissions testing.

you will likely find the car never sees 8 Psi while they are testing.

TiTAN Grand Master

TiTAN

Posted
Posted

Guys what size tanks are you running and how long do they last?

I'm about to order a stage 3 kit and you can get a option for a bigger tank just dunno wether it's necessary.

Sorry for the hijack.

i am running the large snow performance tank, 9.5L capacity.

How long a tank lasts? months, too long to remember fill dates.

tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

I have the 2.8 Ltre tank and for normal highway miles I can do 2000km on a long weekend and am lucky to use 1/2 a litre.

I am usually sitting on 100-120km/h with overtaking and accelerating etc, the normal stuff. So unless you are racing all the time the small tank is heaps. I didn't need 10 litres sloshing around when I couldn't use it.

tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

but the Snow Performance controller just looks so much better :P

Have a look at how I mounted mine in the ash tray recess:

http://www.skylinesaustralia.com/forums/topic/306109-my-wmi-install/

No cutting or anything, pretty much a straight fit with some small brackets to hold it there.

STATUS Grand Master

STATUS

Posted
Posted

Pretty good read which covers installation and results.

It's for a BMW but still worth looking over

http://www.e90post.c...ad.php?t=297336

the last snow WMI kit we had through was on a late model BMW M5.... 304rwkw without 348rwkw with it turned on and setup via injector duty (no ecu tune changes) cant complain.

DaveO74 Mentor

DaveO74

Posted
Posted

Trent would it still be considered "unsafe" on an unopened engine (25) over 300+ kw using WMI? From my limited understanding it has similar effect in regards to knock and temps etc to e85.

I have just installed a 2835 pro s which as we all know will net me around 280 but I'm a little worried about pushing much more out of the stock bottom end.

Rolls Grand Master

Rolls

Posted
Posted

the last snow WMI kit we had through was on a late model BMW M5.... 304rwkw without 348rwkw with it turned on and setup via injector duty (no ecu tune changes) cant complain.

What sort of gains would you expect on an rb25 with a ~250kw turbo that has maxed its capabilities out (eg hot intake air), would it let you run much more ignition timing to make a difference?

tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

Rolls I'd think that you would get an extra 30rwkw out of it.

On the forums they say that 93 octane with 50/50 wmi is 116 octane. Its not what I say, but is quoted on the forums again and again.

So what would your motor do with a cooler combustion chamber and 116 octane fuel?

I remember seeing a really good graphical plot on the differences between no wmi, 50/50 wmi and 100% meth. I'll see if I can find it, but it was a while ago.

In the meantime is you look at:

http://www.snowperformance.net/forum/

and

http://www.aquamist.co.uk/vbulletin/index.php

you will get a good idea of the benefits. There are others as well, but these pretty much cover it all.

Rolls Grand Master

Rolls

Posted
Posted

Do you get the same benefits combining water/meth with E85 as you do with 98 octane? Or is there sort of an octane limit where the increased knock resistance doesn't help you extract any more power?

Thanks for the answers anyway, I might look into it in the future.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...