Jump to content
SAU Community

Recommended Posts

I bought this car about a year ago now of the original owner who imported it in to australia. i have all the import papers with. as per normal it was ment to have all this work done to it take it to the hill climb track for it first practice and breaks valve stem guides. So one thing leads to another and we have fully rebuilt have plenty of photos of all the new parts and receipts to prove it. it is a very quick car on dont really want to sell it but i have been offered a job interstate and it isnt going to get used so would like to see someone else enjoy it. it has 12 months rego and i have only run it in an tuned and done 3 hill climbs with it. just seeing if there is some one out there who wants it. has near new kumho ku36s on it aswell. would be probably lookin for around the 23 mark which i think is quite resonable for what it is

Engine:

Rebuilt less than 2000km ago: Makes 319rwkw on 20PSI ? Tuned by RacePace

- CP forged Pistons

- ACL race bearings

- eagle rods

- OS Giken cam gears

- Oil gallery modifications

- N1 Oil Pump

- Oil filter relocation kit

- carbonetics twin plate clutch

- 1.5 way diff

Fuel System:

- Blitz 700 Injectors

- Nismo fuel pump

- Nismo fuel pressure regulator

Induction:

- Z32 airflow meters

- Garret 2860 (-5) Turbos x2

Exhaust:

- 4 inch Custom "RacePace"? exhaust - Turbo back

Cooling:

- PWR Radiator

- 28 row oil cooler

- Air Diversion panel

- Standard GTR Intercooler

Brakes:

- AP Racing 6 pot ? 360mm Rotors

- Hawk race pads

Electronics:

- Blitz Spec R Dual solenoid boost controller

- Apexi Power FC with hand controller

Interior:

- full bolt in cage

- recaro drivers seat

post-77195-0-40888500-1311652115_thumb.png

post-77195-0-77872100-1311652281_thumb.png

post-77195-0-66822900-1311652421_thumb.png

Link to comment
https://www.sau.com.au/forums/topic/372103-r32-gtr-trackstreet/
Share on other sites

rebuild was finished in about may

rebuild was done by old man who is a mechanic of 30 years+ and tuned at race pace

it was bored out new pistons, rods, bearings clutch balanced fly wheel balanced harmonic balancer balanced new valve stem guides and seals new injectors fitted

post-77195-0-64585900-1312081058_thumb.jpg

it did but as per normal bought it of someone that wasnt really shore what had been done and first time at the hill climb track it broke a valve stem guide so did it once and did it properly now it is all good will put some photos up to prove the new pistons and all

yes still using the crank and there is no issues at all with the car. the thing with the crank is when ya smashin them on the rev limiter all the time and that is one thing i dont do can assure you of that, doesnt make you go any quicker. will get some of the in side when i have it out next. there are no back seats because of the cage recaro drivers seat no cd player not one for all the doof doof shit just nice clean and simple.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...