Jump to content
SAU Community

Recommended Posts

So guys heres the deal,

I got a yellow sticker on my r33 series 2 gt-st for "not having a permit for my POD filter" BUT the cop said that if i place a heat shield on it, that it should be ok. or even if its not too large it shud go through fine. is this tru at all?

also ive got a few other mods that im a bit concerned about but over all my car is pretty stock. Heres a list of my mods and if yous cud let me no if its gonne b a problem or not it wud b much appreciated! Also, are they gonna check every inch of my car? or mainly just the POD filter as thats all the cop wrote it up for?

My mods are as follows,

Aftermarket Front Mount Intercooler.

Turbo timer

Boost gauge

Metal food pedals (not sure about if grip is sufficient)

Super heavy Duty clutch.

Stainless steal exhaust system.

Coil over suspension.

thanks guys, all help is appreciated!

Oh and one more thing. the engine was replaced not long ago but wasnt "registered" or reported or watever to the licencing center. cos apparently ur meant to report that. any way theyll pick up on it?

Edited by fabb
Link to comment
https://www.sau.com.au/forums/topic/372867-going-over-the-pitts-need-some-help/
Share on other sites

My comments are as follows,

Aftermarket Front Mount Intercooler. - should be fine

Turbo timer - needs to be disabled

Boost gauge - should be fine

Metal food pedals (not sure about if grip is sufficient) - needs to have rubber between your foot and the metal, so may need to change back to factorySuper heavy Duty clutch. - should be ok

Stainless steal exhaust system. - aslong as it's not too loud

Coil over suspension. - sometimes the pits complain if it's too stiff, but that's cause they're morons

Make sure there's no oil leaks.

And yeah pod should be secured but doesn't need to be enclosed. (most other states it does though)

All the times I've been pulled over here they have said how common it is for pods not to be braced, and how they liked how mine was. (sadly I still got defected twice for other shit)

pod filter no one cares as long as its not moving around.if u have a s/s intake for it they get all huffy and puffy saying you have a different turbo so if u can use the stock rubber one.

turbo timer doesnt need to be disabled.

coilovers are illegal if they are height adjustable because they arent height adjustable from factory. - sometimes they let ppl through tho so just wind them as high as u can and hope for the best.

did u go from a non turbo to a turbo motor if so u might need engineering. if for example just rb25det-rb25det no issues

i wouldnt bother filing out engine change number, pits will change it for u once u pass

car sounds 99% stock, long as theres no leaks or bad bushes/ obvious problems will be fine

p.s with ur metal foot pedals they have to either be literally bolted on so they cant move or have real good tred. in other news rip that shit off they are gay.

Edited by Char

guys I was told by vehicle safety and standards last week that base adjustable coilovers are ok.

Doesn't matter what they tell you. Matters what mood the inspector that you get is in.

Some complain about coilovers some don't.

nahh previous engine was a rb25det so shudnt b a problem there? yeh the only reason i got the sticker was cos they saw me speeding but had no proof. so they used this to "punish" me. the pod isnt secured but its pretty small and doesnt flap around. the only thing worrying me is the tint. the back window is extremely dark. (cant even see my P's )

but if u dnt need a permit for the Pod filter , then that means the cop yellow stickered me for no reason?? as the only reaason he said he was doing it was cos of not having a permit for the pod/

took it too tint-a-car today.. they said darkest legal is letting %35 light through or more... my door windows were letting about %32 -%33 through.. so hopefully they wont b to uptight and let that slide...

BUT my back window was letting about %5 through!! lol so im screwed there.. defenitly needa get that ripped off..

Yes, remove the hella dark tint.

Yes, secure the pod filter - if it's not secured they were within their rights to defect you for it. Hell, I've been defected for a stock bov! Making a couple of brackets by cutting strips from a sheet of ally isn't very hard.

And yes, it really does depend on the inspector you get on the day.. when I took my 32 over with a fresh RB30DET (hadn't changed numbers yet) I think I got the best possible inspector I could get. Yes the engine was a whole litre larger but it only had a little RB25 turbo on it and looked pretty well stock under the bonnet. When he handed me the keys back he said "thanks for that, I _love_ skylines!" :banana:

I passed with height/damper adjustable coilovers, whiteline swaybars, adj. castor & camber bushes, full exhaust with a shitty cat, pod filter (bracketed down), button clutch, 3L, ebc and some other stuff. The only thing I didn't go over with was my 2-way diff as that would have been a deal breaker!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...