Jump to content
SAU Community

Recommended Posts

Hi all. Yet another noob question to ask. How do you tell if the standard shocks on the R33 are stuffed and need replacement? When i said tell, i meant by the way the shocks handle bumps and whether they are noisy. My ride's shocks go squish on all four whenever I go over a hump and I'm not sure if that's how they are or they're stuffed. Also, my R33 seem to have a slight bodyroll on cornering at 40km/h. Are my swaybar bushings shot or am I asking a stupid question as my understanding is that ALL cars will have bodyroll at a certain speed onwards and performance cars WILL have some sort of bodyroll even with swaybars on, except that the difference being between having a sway bar and not having one.

Opened up a new thread on this as I couldn't find a similar thread asking this. Will appreciate all responds.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/373206-standard-r33-shocks/
Share on other sites

Hi all. Yet another noob question to ask. How do you tell if the standard shocks on the R33 are stuffed and need replacement? When i said tell, i meant by the way the shocks handle bumps and whether they are noisy. My ride's shocks go squish on all four whenever I go over a hump and I'm not sure if that's how they are or they're stuffed. Also, my R33 seem to have a slight bodyroll on cornering at 40km/h. Are my swaybar bushings shot or am I asking a stupid question as my understanding is that ALL cars will have bodyroll at a certain speed onwards and performance cars WILL have some sort of bodyroll even with swaybars on, except that the difference being between having a sway bar and not having one.

Opened up a new thread on this as I couldn't find a similar thread asking this. Will appreciate all responds.

Cheers

Check for leaks and also if when you go over bumps the car bounces up and down excessively that is generally a sign that they are wearing out, or simply push down on the car to test. In regards to the body roll the standard shocks on R33's are really shit. Worthwhile saving up and buying a shock/spring combo or adjustable coilovers.

You can get free inspections done at suspension specialist shops if you're unsure.

To check the condition of the shocks, "bounce" the corner of the car. A good shock should stop the bounce in about 1 cycle. And going "squish" is a sure sign that the shocks are not healthy. Also, you will find that the (current) ride quality is actually harsher than if you had new uprated shocks fitted.

ALL cars, even F1, have body roll in corners. It is a result of the weight being transferred to the outside of the corner. It's all about physics. You can reduce the body roll by fitting upgraded sway bars (DO NOT use springs / shocks to control body roll).

In theory you should replace the factory shocks after 50-60,000 kms, personally I haven't replaced mine, and I work in a suspension shop, but these will be the first main change my car will be getting once I get around to doing it, you really can't put a price on shockies.

I know a set of bilsteins I bought were f**ked because when I went over a dump, they were so soft and flat the front of the car would thud on the ground.

They should feel springy, not sloppy. Bilstein shocks are the best replacement and fine some nice springs for them. All depends what you do with the car. If you go adjustable coilover, make sure you get one with a big resevoir or external one so you can control the ride feel. Ive got height adjustable teins, bumpy as shit on the road.

As for the body roll, Ive taken turns at about 60km and you can feel that any more than that the car is just going to roll. Depends what kind of a turn you are talking about, surface of the road etc. Sway bars are the way to go. 16 year old cars here, the bushings are probably dry, cracked, leaky etc.

Edited by SargeRX8

(DO NOT use springs / shocks to control body roll).

I have always been told the opposite, springs and shocks should be primarily used to control body roll while swaybars are there to assist the springs / shocks. Reason being that springs / shocks will control roll in all axes but swaybars will only control left/right

I'm just guessing that in physics, bodyroll is caused by the sudden shift in weight of the body of the car. Maybe Cassbo is right in saying that shocks and springs can control the bodyroll and the swaybars will only assist in the process. But at the same time, I also guess that people tend not to rely too much on only shocks and springs is that in normal street driving, the spring rates are not as high and will NOT support as much bodyroll as higher rated coilovers do on the track, thus the major emphasis is on swaybars to do the job for cars that are mainly driven on the street.

Someone confirm this for me or correct me if I'm wrong?

Have a think about why swaybars are called swaybars...... Springs and shocks are there to work in tandem to control bumps and undulations in the road surface to keep the car level and swaybars control the sway in cars around corners. Simple as that guys.

Look at how a sway bar works and consider its proper name: anti-roll bar. If you go over a judder bar just to be extreme the left and right arms go up in unison and down in unison just swivelling in their mounts and thus have no effect on the car. Its is only when you throw the car into a turn that the arms move in opposite directions and exert a twisting motion on the bar which will tend to return to its original shape thus reducing roll.

To test a shock as above ^^^: push heavily down on a corner of the car and let go. It should bounce back up and stop dead. If it starts to go down again of its own accord its stuffed. Alternatively some suspension shops will repeat this test for free with a meter attached which will measure the the rebound and give you a printout.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...