Jump to content
SAU Community

Recommended Posts

Is it only in 1st? K&N pods are oiled, and have had bad experiences of the oil on them getting on the afm hotwire, a spray with a bit of electrical contact cleaner helps that out. Other things are make sure it's not overboosting and hitting boost cut (could be a line disconnected/not plumbed right), or other things I'd check are change spark plugs, if they're new, could be coilpacks giving out under load.

Link to comment
https://www.sau.com.au/forums/topic/373518-stagea-choking/#findComment-5957967
Share on other sites

I'm gonna throw boost cut into the mix, have you

Got a gauge fitted?

Mine has a similar issue, had it when it was stock and still does it mow, just not as bad, with every breathing mod I've done it has gotten better.

I'm running standard boost control, full 3" turbo back system with a blitz pod, and my car makes 0.9 bar of boost, ie 12-13 psi. Maybe yours is like mine and it is over boosting.

Link to comment
https://www.sau.com.au/forums/topic/373518-stagea-choking/#findComment-5958303
Share on other sites

If its airflow cut you'll know when you hit it. It's a complete engine cut, feels like the throttle got slammed closed and the engine revs down. By the way S1's don't have a boost cut, no way for the ecu to know the boost pressure.

Has it always felt this way? Or just recently? The stock setups on all rb's is fairly restrictive especially the exhaust, and the stock mapping doesn't favor consistent pull through the rev range, they tend to flatten out around 4500rpm.

Link to comment
https://www.sau.com.au/forums/topic/373518-stagea-choking/#findComment-5958391
Share on other sites

hey guys thanks for replying. its not sparks as i have new lithium ones. i dont hink its air flow coz my revs stay high all the way till it changes gear and keeps driving normal. its not just in fisrt gear. i first noticed it couple months after i got it which is when i put my k&n on. so maybe it is my afm?

sorry i said my car is stock but i didnt think about but i have a 3" all the way and a hi-flow cat. I got the cat put on coz i thought that was the problem. then i got my dump pipe changed and that didnt fix it either. it already came with massive exhaust when i bought it.

so its either the FM or coilpacks?

ive researched abit n thought maybe the ecu needs tuning. i dont know how it works. this is my second car but my first turbo. man the stagea is awwesome.

thanks for your help guys. please keep helping. some mechanics dont even know what a stagea is.

Link to comment
https://www.sau.com.au/forums/topic/373518-stagea-choking/#findComment-5960043
Share on other sites

Overboosting is usually caused by a dodgy boost controller, or when you have the stock set up could be vacuum lines not set up correctly.

I'd say it's either your coilpacks or AFM though. Easiest/cheapest option would be try to give the AFM a good clean with contact cleaner first.

Link to comment
https://www.sau.com.au/forums/topic/373518-stagea-choking/#findComment-5960169
Share on other sites

Somewhere there is a thread on checking the soldered joints insde the AFM connector. I did not do that as I had a spare.

If cleaning the sensor wire does not fix it, see if you can find the fix it thread.

Link to comment
https://www.sau.com.au/forums/topic/373518-stagea-choking/#findComment-5961246
Share on other sites

Hey Guys thanks your support and help. Got my stagea from mechanics yesterday and it's running smooth. I didn't know they go so hard. Turns out the choking problem was related to my spark plugs. I didn't install them properly.I just put them in and didn't do the whole right measurement thing. Don't kno what it's called. Thanks guys. I'm happy with my car now. Also got a boost gauge so I can keep a eye on turbo. also had manifold replaced coz I had a tink crack.

Link to comment
https://www.sau.com.au/forums/topic/373518-stagea-choking/#findComment-5970844
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That R31 was so cool. Only did Orange Park once. Scared the hell out of me.
    • Selling my TE37SLs since I've switched to smaller wheels.  They're for sale in Japan but it's pretty simple to send them overseas; USA excluded, since JPPost isn't sending there at the moment. Specs Front: 18x9.5j +22 5x114 Rear: 18x10j +20 5x114 Price: 320,000 JPY/ 3,285 AUD (current FX rate) Condition: a few scratches here and there, no bends, distortions or cracks.  Tires will not be included for international buyers, I'll get them dismounted before shipping. They're currently listed on yahoo auction and will be shipped in Japan with the tires if they sell here. Shipping costs to Aus: EMS (1-2 weeks): AUD 1,175 (current FX rate) Sea (2 months): AUD 460  (current FX rate)
    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
×
×
  • Create New...