Jump to content
SAU Community

Recommended Posts

does it matter if its legal or not? why bother installing an anti-lag system unless its a track/rally dedicated car??

..it aint gunna get you to westfield any quicker.

Edited by adamskill

You signed up onto SAU to ask whether shooting 1m flames from your exhaust at a set of traffic lights is illegal.....hmmm let me think....

does it matter if its legal or not? why bother installing an anti-lag system unless its a track/rally dedicated car??

..it aint gunna get you to westfield any quicker.

131198730573.jpg

Jokes aside, ive always wondered how antilag works. Very interesting read on wikipedia, like how the restrictors they use create more lag then a normal sports car so the turbo needs to be going stronger before they put the foot down.

http://en.wikipedia.org/wiki/Antilag_system

on the street would be useful if you had a larger turbine and wanted to go on a spirited drive, although its probably very illegal and probably harsh on your powertrain.

I would think the exhaust with mufflers and cat converter would be blown out in a few minutes on the street.

definitely belongs in motorsport though.

Its not stress on the drivetrain you need to worry about.

Its stress on the motor/turbo. That's where the issue is. You'll be replacing turbos quite often if its used even semi-regularly.

thats what i meen,he would be burning through exhaust valves quicker then the turbo though.

I setup antilag on the Vipec for shits and giggles (it's not 100% setup as I'm not that keen on it). Definetely not good for your car though.

You sure Evos have it from factory? What models? I've never heard that before that's all.

You mean proper antilag for between gear changes or just launch control antilag? (I wrote up a post in the past explaining all the different things people refer antilag to but can't be bothered finding it).

Evos do not have antilag from factory.... I used to have one and two of my good mates have them

some of them do. it is a pretty watered down system though. also in some cases it is disabled in the ecu. basically it is put on there as a provision to get around certain homogolation regulations in certian rally classes (group N i think). so basically some of them have all the gear, but it isn't turned on. not sure what models do and don't, but all i know is that the info above generally applies to the evo 3

Most evo's have the "missfiring system" from the factory, it is something that can be turned on in the ECU ( many of the evo ECU's are factory flashable)

You can see the pipework in an OEM engine bay !

However many owners can and do remove it, because for most people having it is irrelevant.

Also,

If one forces sex upon a prostitute is it rape or shoplifting ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...