Jump to content
SAU Community

Recommended Posts

Hey all my girlfriends R32 has had 2 motors die in her r32 and now she is deciding to drop a 25 in there so we have a heap of cheap parts that are up for sale, i'll start with a few things i can think of and add to the list as i find more stuff:

First RB20 (130,00K's)

Blown head gasket and exhaust valve, currently dismantled;

Bottom end is not that bad but the exhaust valve landed in the first piston bore and made some gouges in there :(

Head is seemingly fine except the exhaust valve will need replacing... offers on these two!!

Cams in perfect condition $ Offers

Second RB20 (76,000Ks)

Low Compression on 6th ran fine though just lean in the top end :(

Head is perfect (Just Tested) $250

Intake manifold $ Offers

Exhaust manifold (Just replaced with perfectly straight one) $100

Perfect Condition Cams $ Offers

Bottom end needs rebuild $ Offers

Also these Items;

1X RB20 turbo in decent condition $100

1X RB25 turbo in good condition minimal shaft play $250

1X RB25 turbo suit rebuild, held boost fine just a bit smoky every few days $ Offers

2X RB20 ignitor packs $ Offers

5X Rb20 Coils seem fine just installed one in my motor and it runs fine :) $25 Each

9X RB20 Injectors 6 are known to run fine 3 i've never driven with so may need to be tested $ Offers will sell lot or individually

1x RB20 Rocker Covers Painted metallic black $100

1x RB20 Rocker Covers silver oil hose connector is broken on one needs welding $30

1x RB20 Good condition Exedy Heavy Duty Clutch $ Offers

1x RB20 flywheel $80

1x R32 standard rear bar pretty beaten up Silver colour $50

1x pair of Monza front R32 shocks Good condition sit at a nice low height, top adjusting nut of one is damaged $150

If you are chasing any RB20 parts or wiring PM me here and i'll let you know if we have any ;)

Cheers, Tobbie 0418510695

Edited by tobs_r32
Link to comment
https://www.sau.com.au/forums/topic/374464-tons-of-rbr32-stuff-for-sale/
Share on other sites

I'm in Hobart area Sven. And yeah tof I only had it running in the car for around 6 or 7 hours and didn't really notice it until my mechanic went to tune it and compression tested it. It's pulled apart at tad engine reco atm

I'm in Hobart area Sven. And yeah tof I only had it running in the car for around 6 or 7 hours and didn't really notice it until my mechanic went to tune it and compression tested it. It's pulled apart at tas engine reco atm

yep cool, do you mind if i ring them about it? , how much are you chasing for it?

not a lot dude, after being buggered around so much myself with dodgy second hand parts i wouldn't do it haha! The head was fine and passed all the tests but mark was saying the bottom end is just worn and needs a pretty decent rebuild. I brought it off a guy on here as a fully working RB20 and only had it in a car for a few weeks. What are your plans for it??

NEW UPDATED LIST;

First RB20 (130,00K's)

Blown head gasket and exhaust valve, currently dismantled;

Bottom end is not that bad but the exhaust valve landed in the first piston bore and made some gouges in there :(

Head is seemingly fine except the exhaust valve will need replacing... offers on these two!!

Cams in perfect condition $ Offers

Second RB20 (76,000Ks)

Low Compression on 6th ran fine though just lean in the top end :(

Head is perfect (Just Tested) $250

Intake manifold $SOLD only the top half sold, still have sensors, 2x bottom manifolds etc.

Exhaust manifold (Just replaced with perfectly straight one) $100

Perfect Condition Cams $ Offers

Bottom end needs rebuild $ Offers

Also these Items;

1X RB20 turbo in decent condition $100

1X RB25 turbo in good condition minimal shaft play $SOLD

1X RB25 turbo suit rebuild, held boost fine just a bit smoky every few days $ Offers

2X RB20 ignitor packs $ SOLD

5X Rb20 Coils seem fine just installed one in my motor and it runs fine :) $25 Each

9X RB20 Injectors 6 are known to run fine 3 i've never driven with so may need to be tested $ Offers will sell lot or individually

1x RB20 Rocker Covers Painted metallic black $100

1x RB20 Rocker Covers silver oil hose connector is broken on one needs welding $30

1x RB20 Good condition Exedy Heavy Duty Clutch $ Offers

1x RB20 flywheel $SOLD

1X RB20 ECU - $SOLD

1x R32 standard rear bar pretty beaten up Silver colour $50

1x pair of Monza front R32 shocks Good condition sit at a nice low height, top adjusting nut of one is damaged $150

1X Perfect RB20/S1 RB25 AFM - $120

Coil Pack Looms - Sold

1x RB20 Intake pipe $40

4x Rb20 Cam Gears $20 each

1x Standard RB20 Coil Pack cover

1x R32 Reo plate for behind the backseat with bolts $50

Still have more wiring and sensors in good condition if your after any ;)

Cheers, Tobbie

Edited by tobs_r32
  • 4 weeks later...

Sill have most of this stuff and more!! Make me some offers!!!

Also have;

2x CAS - $offers

1X Pioneer CD Player good working condition $30

1X R32 straight pipe from the front pipe back (Decat as well) has all the hangers on it mounts up nice.. sounds ANIMAL!! $50

1x Front pair of ISC N1 coilovers 9 months old (7,000ks) Currently being rebuilt $500

1x Rear pair of bilstein Adjustables good condition $300

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...