Jump to content
SAU Community

Kat's R33 Gtst Project

savage1987

By savage1987,
in PC & Games Discussion

 Share

Recommended Posts

savage1987 Contributor

savage1987

Posted
Posted

Plenty of work ahead but perhaps not as much as it looks from the photos :)

Cheap car!! and actually passed RWC pretty well straight away so that's a good start.

I'll let the pictures do the talking for now, plenty of info and work coming up in the following months.

IMG_0670.jpg

Is anyone missing their mailbox? I think its under the car!!!!

IMG_0669.jpg

IMG_0682.jpg

Do you think that the pink number plates bring out my eyes?

IMG_0688.jpg

IMG_0666.jpg

IMG_0667.jpg

IMG_0675.jpg

IMG_0672.jpg

IMG_0692.jpg

Replaced both tie rod ends straight off the bat, as one of them looked like this...

IMG_0696.jpg

And replaced the hub on the same side for good measure, just in case anything was bent/damaged, and because the bearing didn't feel 100%... unfortunately it was an ABS hub onto a car without ABS, so it was time for another trademark Sam-spec backyard fix :P Who ever would have thought of using a coke bottle lid to fix a problem......just imagine what you could do with an entire Mount Franklin bottle.....

IMG_0697.jpg

Link to comment
https://www.sau.com.au/forums/topic/375033-kats-r33-gtst-project/
Share on other sites
savage1987 Contributor

savage1987

Posted
  • Author
Posted

Car is officially roadworthy and registered :)

couple of things to sort out

drivers' door doesn't shut as nicely as it should, and the key doesn't work in the lock of the same door properly.

couple of interior plastic trims need replacing with non-broken ones :)

wheels need a bit of a balance

still doesn't make power properly all the time, needs some tuning love I think. Read somewhere R33s don't like Nistune so that's a shame; PowerFC maybe, given that a bigger turbo will be on the cards for later on?? don't know enough about this side of things.

75coupe Grand Master

75coupe

Posted
Posted

wow.... what made you think this is the right section of the forums for this thread....

Ive seen them turn up in the wrong thread before but this is obtuse

interested to see how/where your build goes though

savage1987 Contributor

savage1987

Posted
  • Author
Posted

*sigh.

I reported the post immediately when I realised it was in the COMPLETELY wrong section of the forum. I don't usually make mistakes like this :( and apparently the moderators took their time moving it, as it still hasn't been moved.

Hmm..

The possibilities are endless.

Anyway thanks for the altogether useful and productive advice you have all given so far :D

savage1987 Contributor

savage1987

Posted
  • Author
Posted

so we swapped the HKS pod for a generic pod PLUS a FMIC with all piping!

WTF!!

Pretty keen to get stuck into building this thing properly, but first i think it really needs a tune or SOMETHING since it uses about 540000L / 100km.

Sometime around Christmas we will strip the entire car and prep it for painting, inside and out. Panel shop can take care of the actual colour laying for us :)

Yo-Yo Grand Master

Yo-Yo

Posted
Posted

Anyway thanks for the altogether useful and productive advice you have all given so far :D

don't mind the nerds, you DID post in the gaming section after all :nyaanyaa:

My first car was an r33 that had exactly the same colour scheme factory two tone silver & grey, ahh the memories

  • 2 weeks later...
savage1987 Contributor

savage1987

Posted
  • Author
Posted

so I'm having trouble chasing down the source of a misfire / spark breakdown..

Idles fine

Coasting down in gear misfires

Under part or full throttle misfires at random so hard the R&R must kick in or something because it's like the power just drops away for a moment now and then

I've changed the O2 sensor just behind the turbo, there looks to be another one in the rear of the catalytic convertor but I don't know what the deal is with that..? Is this a common issue?

There's also an earth strap just hanging free from the floorpan right next to the catalytic convertor... where is this supposed to go?

The earth strap in the engine bay from the motor to the strut tower is a piece of shit, I need to replace this because it's rubbish and I'm not happy with it at all.

Other than this issue the car's going alright :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...