Jump to content
SAU Community

Recommended Posts

Flame suit on.

Okay, so had bought a reliable car, a 2000 magna, auto. And the auto box died with the semi-common failure of a wave spring deep in the box. It's been off the road for 3 weeks while I've sourced a cheap, second hand reco'd gearbox and had it shipped from Melbourne. Given I have no car and the magna needs to be towed to a mechanic for the transplant, it could be 2 more weeks before I get the box to the car and get the mechanic to fit it.

So, again, looking at a reliable car, to buy asap cos I'm so sick of not having one. I've owned camrys before and they've been pretty damn reliable given the neglect they've received from me and my family (before my automotive enlightenment).

Does anyone know how the 3.0L engine compares to the 2.2L, and the manual compares to the auto, in terms of reliability in 1996-2000 camrys?

A long shot, I know, but I am amazed at the wealth of knowledge on these forums on a daily basis.

Cheers all :D

Link to comment
https://www.sau.com.au/forums/topic/375256-camry-enginebox-reliability/
Share on other sites

Cheers mate. Yeah, our family had a '94 camry for a lot of years, likewise a '98 one. Both auto 2.2L and both were very reliable (except for some small oil leak that dripped onto and destroyed the timing belt on the '94 one before I owned it).

I'm looking for a manual v6, as long as the reliability is still there and the price is right. Just want something that goes, is safe and is reliable. Then to save for a fun car again banana.gif

Edited by Galois

Depends on kms, location etc. Seem to be under 5k for what I'm after. Magna is the other car, which would be a significantly better buy in terms of power/riding the wave of torque (300 Nm). Some autos are a bit of a time bomb, I'm one of the unlucky ones apparently.

A manual 3rd gen magna with either the 3.0L or 3.5L engine is a real surprise. My brother recently got a manual 2002 magna, 3.5L, with a new clutch, brakes and new suspension, a parana chip (whatever that is) and a tune for 4.5k and it is an absolute beast of torque. The new suspension makes a world of difference too. He's gonna need to upgrade the clutch soon lol.

I'm thinking of getting something like that as the next car, if we sell the auto magna. Ahh, one day i'll have a propper sports car again lol, atm I'm just aiming for a running car.

Edited by Galois

yeah manual magnas are great (i've owned 2 3.5L ones, pretty sure i've discussed this with you in the past).

as for the v6 camry, i don't know much about them but i would think that being a camry it should be pretty reliable as they aren't really commonly bought by younger people so there is much less chance it's had a hard life. probably the biggest issue is more if it's been owned by someone who doesn't get it serviced as often as they should

Yeah, I should have gone with a manual one! Will again one day, prolly a vrx.

There's also the issue of dreamers who think their sh!thouse cars are worth as much as a premium one, oh wait that's an issue with all second hand car buying

My folks had a '94 2.2L Auto. Was never thrashed and was kelt serviced by my old man who's a mechanic (auto trans) by trade.

Two head gaskets over 2 years. Once with a rebuild. I sold it for them, blown, for $800. Hated that bloody thing.

my gf has a avalon 1M-FE (i think) 3 litre V6 auto . . has 200,000ks on the clock and doesnt seem to want to stop, all weve had to do is have the rocker cover gaskets changed + regular servicing and minor stuff like brake pads (easy to do yourself)and parts are cheap and plentifull. . . .bloke over here in the west dropped a (aftermarket) turbo version in his MR2 , goes like hell

my gf has the 1M-FE (i think) V6 3 litre auto in her avalon . . good economical motor with no issues, cheap parts, easy to fix, just a bit hard to access anything on the back of the motor

We ended up getting a 2000 model auto v6, and couldn't be happier with the buy. The suspension is still firm, the power is all there, easily blasting along without going above 3k rpm. Had the trailer on it yesterday and it was fine, almost like itbwasnt there. Its got 190k (major service every 150 thou, not 100), but of the half dozen we tested over the weekend, all with much lower km, it was by far the best.

Doesn't white have the torque of the 3.5 magna, but the build.quality and comfort seems much better

Not sure which model Camry (V6 models only) - but keep an eye on the knock sensors, crank angle sensor and waterpump.

Always use toyota genuine coolant.

Apparently the variable intake length manifold may play up, which may cause the car to fell a little sluggish, but will not cause you to break down.

Not sure which model Camry (V6 models only) - but keep an eye on the knock sensors, crank angle sensor and waterpump.

Always use toyota genuine coolant.

Apparently the variable intake length manifold may play up, which may cause the car to fell a little sluggish, but will not cause you to break down.

Hmmm, how exactly do I keep an eye on them? Watch for the engine light and listen for knocking? How would I notice if the variable length intake manifold (didn't know it had one btw lol) is playing up? Sorry for the qs.

how much did you pay?

$4700, I'm imagining we'll be using this car for a long long time though. It's so comfortable, easily enough grunt to pull a trailer on a freeway, just nice to cruise in. I just have to make sure to keep up the amorall and waxing etc to keep it in good shape. Will probably change all fluids over the next 20k km, just so I know what's in there. Might be worth putting a transmission cooler on too.

How's the soarer going?

pretty good. i've gotten used to the r154, its a little clunky, but you learn to deal with it. i'll have to do the timing belts soon though. and i haven't fixed my speed sensor. so i get lottery numbers at speeds above 70kmh. lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
    • I got the ARC M079 due to the space constraint.  Been running mint for the last 3 years.  Plazmaman also seems like a really solid choice but not used myself.    Hunt around for a better price but this is what I have - https://www.rhdjapan.com/arc-brazing-intercooler-smic-m079-bnr32.html
    • Wanted to follow up on this. Did you end up getting the M073? Still deciding on what to get between nismo m073-79 and plazaman.  
    • I was just watching these boys up in QLD AWD'ing their S13 too.  
    • Por que no los dos? At least my euro brawler is reliable - unlike the JDMs I've had. Sheraaz you look familiar, did you ever come to an SAU VIC meet aaaaaages ago?
×
×
  • Create New...