Jump to content
SAU Community

Recommended Posts

Hi guys im looking to upgrade my fuel system for E85 in my rb25 looking for a setup that can handle approx 300rwkw just wondering what injectors have the best spray pattern and are obviously suitable for E85

also after suggestions for a good fuel pump? easiest installation is another factor that must be considered

Id appreciate any feedback and some tech on the reasons why i should use a specific injector and pump for my setup?

:thanks:

Injectors anything 500 or over should be fine although having said that ID1000s are very popular and leave room to grow!

Fuel pump Bosch 044 in your tank will handle 300kw.

I've heard the nismo injectors spray pattern isnt that crash hot and i would of thought 555 nismos would be too small for E85 hence the reason im selling my 550cc sards for 740cc minimum. Has anybody used the Power enterprise 850cc's? Do the larger injectors idle ok? I have seen the ID2000 in a 120hp Honda integra behave like standard but i am liking the idea of direct drop in units

nismo injector spray patterns are fine. They are just a rebranded denso injector. It's actually the sards that are a bit ordinary as they are (or used to be) single pintle.

Nothing wrong with the PE injectors and they'd be my pick for e85 in an rb25 with your target power.

ID1000 and 2000 injectors are good things, just a bit of extra work (and cost) getting them in an rb25

Does anybody know who would have a good price on a set of the 850cc PE injectors? :whistling:

nismo injector spray patterns are fine. They are just a rebranded denso injector. It's actually the sards that are a bit ordinary as they are (or used to be) single pintle.

Nothing wrong with the PE injectors and they'd be my pick for e85 in an rb25 with your target power.

ID1000 and 2000 injectors are good things, just a bit of extra work (and cost) getting them in an rb25

I've heard the nismo injectors spray pattern isnt that crash hot and i would of thought 555 nismos would be too small for E85 hence the reason im selling my 550cc sards for 740cc minimum. Has anybody used the Power enterprise 850cc's? Do the larger injectors idle ok? I have seen the ID2000 in a 120hp Honda integra behave like standard but i am liking the idea of direct drop in units

nismo spray pattern is fine as said. they also make 740s for rb25, not just 555s

oh ok so the sards are cheaper for the same injector? cjmotor claimed the sards were not suitable for E85 but the PE were!

Ill prob just buy the sard 850cc then then

Power Enterprise and Sard repackage the same Denso injectors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...