Jump to content
SAU Community

Recommended Posts

Yeah yeah, searched various sections. I'm sick of starting threads too...so just want concise answers please :)

my pedal bracket snapped, as they do. Now it's easily fixed up by frankenstein-style welding that shit - but I need to remove it. I'm not at all interested in dismantling my dash (at least not too much) so I want to know - has anyone removed it on a GTS-T without taking their dash out? Is it doable? I've heard speculation that the bracket itself is actually spot-welded onto the firewall as well as bolted in, true?

If anyone has pics of the standard pedal bracket out of the car, it would be much appreciated so I can see where the mounting points are :D

post-60560-0-40915300-1315026344_thumb.jpg

that's what's up with mine. Easy fix, if I can get it out.

cheers

Link to comment
https://www.sau.com.au/forums/topic/376086-r33-gts-t-clutch-pedal-bracket/
Share on other sites

Easy as.

- Undo the 2 nuts on the master cylinder in the engine bay.

- Get a torch and pull the pin on the clutch cylinder rod.

- Unplug the clutch pedal switch

- Undo bolt pointing straight up hold pedal box.

Wiggle it out. Should take about about 30mins first time.

  • Like 1

Its not a bitch, just a tight space. As the other guys have said its that easy. Once you've welded it back up, paint it silver then you can say it's a nismo unit. Cos thats all they do

I've found the final mounting point of the bracket. There is NO WAY you can undo it. It's up the very top of the bracket.

Unless there's something different about my pedal bracket, I call bullshit that anyone has ever done this with the dash in place.

I have, a few times. I use a 3/8 drive swivel socket, 12mm from memory. Got a kid nearby with skinny hands??

swivel socket = effectively a U-joint?

looking at pics of the "Nismo" replacement, I'll be using a long extension for the socket and going straight up IN FRONT of the pedal itself?

http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=86651&group_ID=325&store=&dir=catalog

Something like that sucker, 3/8 drive rachet, 120mm extension and socket. Dunno why yours is being so difficult

ok all good mate, got it done.

Mine was so difficult because it took me forever to find that last bolt, and then because of how I discovered it I concluded it wasn't possible to get to.

Ended up just using the larger ratchet drive (since I don't have any small drive 12mm sockets) and a really long extension.

And it's back in. I must say, putting it back in was MILLIONS times more difficult than pulling it out. That bolt I was having trouble finding was a PRICK to get back in :(

Either way, she's welded up nicely (read: horribly. We used an arc welder - blew a few holes through the bracket rofl) and back in. Only downside is my battery went flat from having the door open all the time :(

Thanks for the help guys!

  • 3 years later...

WOW I have never pulled out a clutch peddle befor and got it out in about 20 minutes, welded it up and back it took no longer than 1 hour. only 2 nuts, 1 bolt and a pin. super easy !! but I am a bike mechanic so it would be easier than if you have never really done this be for but very good to learn how to fix these small things rather than paying someone probably about $400 to fix it for you

Yes not that difficult, but I found breaking other items was the worst part, boot release for example.

So whenever I'm working on/under/around the dash, out come the front seats first thing.

Then unbolt the boot release as the handle is flimsy plastic and if you accidentally sit on it, she'll break.

Toss in a few bags of rags to lie on and I'm ready to go.

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...