Jump to content
SAU Community

Recommended Posts

Hi all, just wanna make a quick question about the factoy bose unit on the 2003 V35, is it common for the 6 discs cd stacker to break or jam?? and is it a easy fix?? I have done abit of research and found some horrible stories, that a faulty cd stacker could lead to A/C malfunctions and battery drains and other disastrous scenarios...I would like to know if these are just some extreme cases or a common issue which most owners experience, only reason asking is bcuz I have looked into buying a 03 model v35 skyline and the cd stacker happened to be apparently "jammed" with error code F0 or soemthing...dont really mind if its an easy fix but if it is a quite seriouse issue then i might have to reconsider...

owners comments and experiences would be greatly appreciated

thanks all

Link to comment
https://www.sau.com.au/forums/topic/376211-cd-stacker-issue-v35/
Share on other sites

VERY common. I get a call a week asking for a way to fix them. parts are not available for them due to age and the best solution is to rip the lot and sart fresh.

happy to elaborate on it if you wish.

so i guess double din unit and the facia kit is the way to go, just wondering does the factory pop up screen still work after the conversion? or does it become completely useless?

I went with a CarPC, and left the dead CD staker where it was. I can also switch over to the inbuilt nissan computer for fuel economy and service intervals etc

And if you get the correct cable from Chris ^^^, you can plug whatever device you like into the factory tv :)

I have my CarPC plugged into this screen using a cable from Chris, and also a reverse camera which switches over automatically when you put it in reverse.

So the factory screen is very useful. My center console looks completely stock, and it all tucks away as original.

BFH! (Big Fkn Hammer.)

seriously it is full strip down of the thing and at the end of it the unit is a throw away. this depends WHERE the transport has locked up. some are easy to strip others you will destroy pulling them apart.

time to bend over and take it like a man :P

its a new panel,ac controls, bose lead and SWC unit then a new radio then its fixed. its not going to be a cheap exercise.

There is a how to on the removal of the CD's on youtube

Chris - With the cartridge removed as in the video, will the radio, tape, AC etc still function or is there a self check it does that will make it spit the dummy?

I'm going to have to decide whether to add Ipod interface or do the financially painful change to a double din setup. Not looking forward to it.

it will run without it BUT the ipod lead that I sell will not work as it disables the port that it plugs into if you remove it. there is a trick to it but it is at board level and I do not wish to disclose that for the express reason people will start harassing me when they destroy a board whilst trying to mod it.

Mark, buy this

http://cgi.ebay.com/...=item3cbbeb0f3c or a new one = $300 shipped these days

and this

http://www.skylinesa...04#entry5994404 ---> similar to what I have and is AWESOME!

= profit!!!

Looks good. Is that a Metra Kit or Original?

How well does the colour matching with the G35 kits go with the V35 interiors especially on a 2001 300GT?

Edited by o2bfit

That is a 2nd hand original kit. DON'T EVER CONSIDER USING THE METRA. It is a pos. You can spot the Metra rubber buttons a mile off - they are crap and apparently the climate units are know for failing.

Colour match is perfect on mine.

Question regarding the interior colour. The interior of the my 2001 300GT console is a dull khaki dark greyish colour which I assume is Willow (its certainly no silver or black). There appears to be differences in the jdm colour advertised on ebay, some mention it is a silver/willow, some willow has dark grey on the vents.

This is the closest I've found to my interior but the seller won't ship to NZ.

post-74494-0-54973600-1316252005_thumb.jpg

Does anyone have any information about the interior colours available for the V35 and G35?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...