Jump to content
SAU Community

Recommended Posts

hey guys

car :Hr31 GTSX

wanting to a conversion my car to a AWD i know it costly just need to know want i need to do

can you run a rb25 block in a AWD situation

running a rb26 crank, rod, pistons in a rb25 block making it a 2.7L(i think) with rb26 head rb26 sump etc

all your help would be great thx

Link to comment
https://www.sau.com.au/forums/topic/376286-hr31-gtsx-gtr-conversion/
Share on other sites

Let me guess, you are 17 years old?

for starter why the f**k would you say im 17 you dont f**ken know me

im asking for help on a topic that i dont know much on

stop f**ken running you mouth about ppl you dont know 2 cent about, so what if i want to do a AWD conversion to my gtsx it not your car it my car to go f**k your self

and ads thx for the info

Pete hasn't done the conversion at all.

Ive done the entire conversion start to finish for him.

Its a nightmare job, honestly unless you came to me with 10k plus I'd turn the job down.

Custom rear subframe, custom subframe locations in the rear.

Front needs a rail section for the drive shafts, crush tubes and a Gtr trans tunnel grafted or fabricated, front upper sections Plus the obundance of little things that adds up to hundreds of hours.

for starter why the f**k would you say im 17 you dont f**ken know me

im asking for help on a topic that i dont know much on

stop f**ken running you mouth about ppl you dont know 2 cent about, so what if i want to do a AWD conversion to my gtsx it not your car it my car to go f**k your self

Because it seems like the sort of question that 17 year olds come on here and other forums asking because they don't know that it's a spastic idea with no benefit. The smart move would be to a) Not f**k up a GTSX, and b) just get a cheap R32 GTR. But no, we all have to come up with an original idea for a conversion because we need to be different.

Pete hasn't done the conversion at all.

Ive done the entire conversion start to finish for him.

Its a nightmare job, honestly unless you came to me with 10k plus I'd turn the job down.

Custom rear subframe, custom subframe locations in the rear.

Front needs a rail section for the drive shafts, crush tubes and a Gtr trans tunnel grafted or fabricated, front upper sections Plus the obundance of little things that adds up to hundreds of hours.

Sorry champ i didn't know much about how he was going about doing it! All i read was he was making it AWD and i read little updates here and there, i wasn't sure if he was doing it or not!

Much credit for you taking on a large task though i would imagian it would be a headache!

for starter why the f**k would you say im 17 you dont f**ken know me

im asking for help on a topic that i dont know much on

stop f**ken running you mouth about ppl you dont know 2 cent about, so what if i want to do a AWD conversion to my gtsx it not your car it my car to go f**k your self

and ads thx for the info

Yep, types like a 17 year old.

Pete hasn't done the conversion at all.

Ive done the entire conversion start to finish for him.

Its a nightmare job, honestly unless you came to me with 10k plus I'd turn the job down.

Custom rear subframe, custom subframe locations in the rear.

Front needs a rail section for the drive shafts, crush tubes and a Gtr trans tunnel grafted or fabricated, front upper sections Plus the obundance of little things that adds up to hundreds of hours.

What do you reckon the weight will be?

I remember putting my GTS-R on a bridge years ago and it was 1400-1410 without me in it.

Would be one hefty beast with a 4WD running gear in it and the aero of a brick :teehee:

Pete didn't really care about being different. The motivation behind it was more the fact his pete......

It actually started as an rb26/30 conversion. That went to an r33 GTR rear end. Then to a dry sump conversion and for some stupid reason he asked if id convert it to be awd for shits n giggles.

Ash I'd agree it's a heavy pig. Not sure of the weight yet it's not finished. Once his back from overseas the engine will probably get finished

ok cool thx brad about the rear end what can be done to get the adjustment in it i know about the r33 rear sub-frame is their anything that can be done with the sub frame and arm that are in it ??

how much would i be looking at just for the read end for someone to do it?

and would you recommend someone since you dont want to do it

would really like someone that has done it before

I only know of one other person who has done it. I went and looked at that car before doing Pete's and threw up in my own throat it was that poorly done.

Any decent chassis builder and good fabricator should be able to do the job, cost could be anything from 5-6k plus shocks.

Problem is it's an arse hole of a job to align the rear subframe with the chassis. That's where most of the time goes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...