Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Common problem, just changed to the shockproof oil a couple of weeks ago and sure enough I have oil coming out of the breather, never had this issue until this oil went in.

Is there a solution to this issue other than changing the oil, seems like a waste of big dollars to dump it for a different brand.

Might try contacting Redline otherwise.

Would be interested to hear what redline have to say about it. By the sounds of it there is something within the oil itself which is causing it to froth up, only solution really is to dump it and get another oil.

That is FALSE - Do not think that extending your breathers will fix the problem.

We extended them higher and longer. It still made it all the way up and 1L would come out on cruise but none on the race track. It was only ever on the way to the race track we would lose that much. It would still lose it in small amounts on the track but not even a fraction in comparison.

They are just avoiding the problem. We moved to a better oil, we no longer have this problem

Hmmm interesting. So what happens when it has "climbed" all the oil out of the box? You have to keep refilling it all the time? Sounds shifty, im still running the oil previously mentioned and have had not 1 drip come out of the breather that i can see.

Edited by joeyta22

Hmmm interesting. So what happens when it has "climbed" all the oil out of the box? You have to keep refilling it all the time? Sounds shifty, im still running the oil previously mentioned and have had not 1 drip come out of the breather that i can see.

Yes, we had to keep pumping it back in. Even when it was 1L down, it would still pump it out up 3M of hose that was half a meter higher than the factory point and spit another half litre out into our bottle

We use Royal Purple 75w85 in all the street car stuff and Royal Purple 85w140 in the race stuff

Or Motul Gear Competition on request

im assuming this is in reference to Max-Gear which is suitable for diffs (75W-90, 75W-140, 85W-140 1quart bottles)

for gearbox i only see Synchromax listed but no info on the weights available

also cant find anything on Max-Gear being suitable for LSD

Syncromax is different

Synchromax® is recommended for manual transmissions that specify an automatic transmission fluid or motor oil. It is also ideal for 4x4 transfer cases and / or 2-cycle and 4-cycle motorcycle gear boxes.

And yes - Max Gear is suitable for LSD

  • 6 months later...

Righto,

fears are confirmed.. THERE IS f**kIN OIL EVERY!!!, seems to only happen on longer trips EG 100km plus.. anyway

the redline light shock proof is absolutly pissing out the breather, not going to risk spending that much money again. Dont really care if it was a bad batch. Going to change to something else..

probably RP or Motul like Elite has recommended

cheers

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...