Jump to content
SAU Community

Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

The 180sx is actually leaving us next week and going to a new home.

We've got 2 integras, a turbo mx5 and soon the NA 4.0L r32 which are all being used for the school cars.

The integras took some work to get back up to spec after spending a few years being neglected, the r32 is to replace the 180sx and who knows what boz has in mind for the mx5.

The 180sx is actually leaving us next week and going to a new home.

We've got 2 integras, a turbo mx5 and soon the NA 4.0L r32 which are all being used for the school cars.

The integras took some work to get back up to spec after spending a few years being neglected, the r32 is to replace the 180sx and who knows what boz has in mind for the mx5.

Id also look at doing a season of supersprints to see how it all goes first.

i.e. cost wise/car wise - time to get prepared before the event and car set up and alignments done!

all adds up or as uncle jumpstart said I mean Duncan do the state motorkana series!

next year I'll be doing more sprints as its cheaper - it does add up with a mortgage!

Quick look on eBay and I seen 3 decent cars for around the 4-5k mark.

A mate of mine is also about to put up for sale an r32 gts4 which has just had a stagea rb25det engine fitted. It's a few more dollars than those cars but hell fun to drive.

Quick look on eBay and I seen 3 decent cars for around the 4-5k mark.

A mate of mine is also about to put up for sale an r32 gts4 which has just had a stagea rb25det engine fitted. It's a few more dollars than those cars but hell fun to drive.

how much is he selling it for?

  • 3 weeks later...

Gents,

Hope all is well.

Digging up an older thread, there only seems to be rules for the mini's on the MRA website, i tried emailing one of the contacts on the website with no luck. Can someone tell me where to get the regs for the other classes.

By the way i will be keeping the R33 and using it.

Cheers,

Daniel

http://www.mraseries.com.au/documents/2011/series/2011%20MRA%20Vehicle%20Regulations.pdf

If you wanted to enter the Skyline, you would be class C or Class D (depending on treaded or slick tyres)

Category: Combined Sedans / Super TT

Rules of Competition.

1. The body shape must be a sedan or coupe.

2. All cars must comply with the relevant CAMS category rules that the car was built too.

3. Competitors are eligible for points upon payment of an annual Eligibility Fee (currently $30),to be

applied by the MRA toward operating costs (trophies etc). Competitors must ensure the MRA

Secretary receives this Fee prior to practice at the first meeting.

4. All competitors are subject to the below class structure.

5. Capacity multipliers for turbo, supercharged and rotaries will apply to all cars.

Classes.

Class A Over 2L on Slick tyres (2001 cc upwards)

Class B Under 2L on Slick tyres (up to and including 2000 cc)

Class C Over 2L on Treaded tyres (2001 cc upwards)

Class D Under 2L on Treaded tyres (up to and including 2000 cc)

Note:

1. The onus is on the competitor to present their car in a compliant and legal condition.

2. Remember – “If it’s not in the Rules, you can’t do it”.

I have underlined the important bit.

Basically the car needs either a CAMS or AASA log book

If the car is modified, even with just a front mount, the easiest logbook to get would be: Group 3D Sports sedan

From memory there are a couple of guys on here trying to get the R32 and R33 on the Group 2 Sports cars list.

Anyway hope this helps

Andrew

I'll eventually finish something I've been working on.

Just haven't had the time in between preparing and building other peoples cars to get anything of my own done lately.

John decided to keep the 180sx so that build is now back in full swing and has gone spastic, leaves little time for my own cars as we do that after hours instead.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...