Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 3 weeks later...

with weather cooling decided to head out to heathcote to run the car in cooler ambient temp - wasn't that much cooler unfortunately, it's just far too hot out there, will have to wait for winter before the temps cool down

did 3 consecutive 10.8s at varying launch rpms

quickest was a 10.81 @ 134.73 mph with track temp at 30degrees. 60ft 1.79 using lc5 with a custom 4100rpm launch control in full auto mode.

was still a touch laggy off the line, even with 21" street tyres. Ran out of time and track temp was steadily increasing so didn't get a chance to try my 4500rpm launch map. that 10.7 is definitely within reach if the ambient temp comes down

timeslip_240313_zps4a02ed67.jpeg

video.... wheelspin through 1st so short shifted. this run was good for a 10.83

http://youtu.be/DQnO0Mgfvko

timeslip_240313_2_zpsdbe4bbd5.jpeg

next time ill be putting my stock wheels/tyres on the rear and shooting for a better 60ft

looking at my datalogs, vdc-r is kicking in through 1st and 2nd and limiting boost to 15-16psi through most of the midrange. im only seeing 17+psi into 3rd

What tyres were u using? Aren't u on 21inch ADV wheels?

21in should give you better traction than a 20in, isn't it?

wheels are 21x10 and 21x11.5 with 255/35f and 295/30r

tyres are Yokohama Advan V103. they are regular high performance street tyres and not r-compound tyres like the oem Bridgestones or Dunlops, so there is a definite lack of grip compared to oem

for eg; on the street it'll spin all 4 wheels in 2nd and 3rd and using lc is pointless - on my oem tyres i get no slip from a roll on

there is nothing wrong with 21" wheels imo, the ride comfort on non-runflat tyres is leaps and bounds better than oem, especially on coarse highway bitumen. the only limiting factor is tyre choice. atm no one offers r-compound tyres in 21"

i run the exact same tyres on my evo x in a square 255/35 19x9.5 setup and they offer no wheelspin launching at 5k rpm. the power of the GTR is just too much for them, but i persist because they are one of the most comfortable high performance tyre on the market

I see. It's a pity Michelin PSS don't have too many sizes in the 21in. That would have solved your problems.

In the 20in, you could wear the MPSS in 285f and 335r, which should give massive traction in the rears.

the pss aren't available in the sizes i want, only the ps2. i've still got plenty of tread left on these yokohamas so ill just wait it out and see what becomes available in the future.

yeh i could even put some toyo r888s on my stock wheels and use them for drag, but i don't want to spend any money on drag racing, not when i'm still on the fence about swapping out the turbos

this is what i prefer to do with my gtr....

http://dl.dropbox.com/u/79172343/Tasmania%202013/TAS_012013_MurchisonHwy.avi

http://dl.dropbox.com/u/79172343/Tasmania%202013/TAS_012013_LyellHwy_01.avi

http://dl.dropbox.com/u/79172343/Tasmania%202013/TAS_012013_PoatinaRd.avi

  • 11 months later...

decided to take next step with my R35 build

drove back up to Willall Racing and installed their WR600 ball bearing turbos, ported + polished the intake manifold and ended up at 475awkw @ a nice safe 18psi on E85 - 425awkw on 98

ended up swapping out my 2.75" intakes for 3" with green filters, and swapped dw950s for asnu 1150cc injectors

Willall modified my bell housing to get rid of the trademark R35 rattle and it's one of the best things i've done to the car

noticeable difference compared to stock turbos, WR600 turbos come on harder and make 18psi right to redline - the difference on the street is far more noticeable than the dyno numbers of +50kw would suggest given power just keeps building right to redline. roll on in 2nd or 3rd is rediculous

too much power for stock clutch to handle, so we installed some Dodson clutch packs, welded baskets to safe guard against higher torque loads and a few other Willall Racing misc parts to keep the trans happy and smooth

once the clutches are bed'd in, ill be hitting the strip. should be good for a low 10s on 21" street tyres (now running mich ps2's) - with boost off the line and cobb v3 adjustable launch control rpm

1619171_398304300316275_1206102334_n_zps

1463000_376702752476430_24326701_n_zps4a

C9CA278C-FACB-4D2D-B071-87763ADE7315_zps

A01E6CEB-80E7-4D7D-8998-7D151439C052_zps

5425_10152215779132990_1480154084_n_zpsd

1505103_10152241173762990_1353945557_n_z

1974990_430692210410817_2111539217_n_zps

6914D3E4-B67A-46A6-8015-50D10EA63089_zps

1922233_430692227077482_958048448_n_zps3

bit of a visual update to go along with the new mods - current bumper and brushed gunmetal wheel lips for my ADVs

DSC00602_zpseed0e089.jpg

DSC00611_zpsb7010de6.jpg

DSC00615_zpsdbd93f83.jpg

  • Like 1
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...