Jump to content
SAU Community

Recommended Posts

When injectors get clogged/dirty they lose their factory spray (mist) and turn into a leaky tap, could explain why it's running rich.. no way to know for absolute sure unless the injectors are taken out and cleaned&flow tested.

There has to be a reason why there is excess fuel being dumped in, someone has suggested looking for a Atmo BOV which would cause the car to stall while slowing down and running rich (metered air being dumped to the atmosphere before it reached the engine instead of being re-circulated as the stock ecu expects).. although you would know you have one by the wanky noise.

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Stock Bov mate. had a talk with the old owner who had her for 7 yrs. He reckons that it would be the AFM because it went faulty on him once and caused shit fuel economy but said it was doing its thing fine. But i suppose the injectors would be due for a clean, or would it be worth getting newys. Thanks mate for the suggestion wouldnt have bothered getting injectors done if it wasnt for your input. Ill get quotes tommorow :)

Yes cal my driving style will contribute. BUT my mechanic has had all his scan tools on there and the car runs very rich that is the problem. i had to fill up to the brim twice coming back from Melbourne so a 500k trip this was full to empty each time.

No I mean AFR.

AFM Voltage is irrelevant for me because it doesn't determine how much fuel the engine is getting at a certain point. It merely tells how much air is coming in to the engine so the ecu can work it out

If your hitting 5v at WOT then sounds like your maxing out the AFM anyway

to op, my story:

for the last 1 to 1.5 years i've been getting around 280 to 320km a full tank (60 liters) so thats's 18.75 liters/100km, i've just changed my fuel filter and now i'm getting 390-440km a tank (so i've wasted so much fuel this last year because of a dirty $20 fuel filter). Just from changing my fuel filter my economy is from 18.75 liters/100km to now 13.63 liters/100km. so if you haven't try changing your fuel filter and see how that goes. good luck.

fuel pressure was fine he tested it. he would clamp the hose and the pressure would go really high indicating a good pump.
Then he had a gauge connected. What did it read? Just because it has "good" fuel pressure doesn't mean it has "correct" fuel pressure.
he said not to bother as they were working when it comes to injectors. they were working fine apparently and the problem is running rich
If the injectors are dirty, they can hold the needle slightly open, allowing too much fuel to enter the engine. Result = RICH. So, are the injectors clean and flowing correctly?

I said it my first post, put it on a dyno and check AFR's, AFM voltages wont tell you the full story. For the reasons that have been listed in the post above plus many more, everything could be alright on paper, but your car is running Rich and causing bad fuel economy. Take it to a tuner and ask him to put it on the dyno and check the AFR's

Sensor voltages are really just inputs to the ECU, 4V at the AFM doesnt mean its going to put X amount of fuel into the engine.

I've recently just replaced one of my O2 sensors, and my fuel economy has increased by a huge amount. :rofl: So will be checking them on a regular basis.

I read online that having a faulty O2 sensor, you can use up to 30% more fuel. :rant:

Yep, I recently replaced my O2 sensor with a cheapish one from Vulture Motorsport.

http://www.skylinesa..._gopid__6063325

Also reset the ECU. Economy went from 300 km / 45L = 15L / 100km to 400km / 47L = 11.75L / 100km.

Definately worth trying this. Cheerin'. :D

After a few weeks I cleaned the AFM, which didn't seem to change economy but it did stop an issue at 10psi boostin' time.:w00t:

Edited by Not a Pulsar

I've recently just replaced one of my O2 sensors, and my fuel economy has increased by a huge amount. :rofl: So will be checking them on a regular basis.

I read online that having a faulty O2 sensor, you can use up to 30% more fuel. :rant:

yeah at light load the o2 sensors make the car run at around 14.5:1 AFR, if you unplug the o2 sensor, at the same throttle load it will run richer at aroung 12:1 AFR

I have recently lost my job so fuel economy isnt a problem because im on the bike at the moment. but from the sounds of it my goal is new o2 sensor and then get it on the dyno. i have done the fuel filter recently and no avail. Oh and most importantly injectors checked out

Coilpacks wouldn't make to much difference on fuel economy (unless they were colpletely wrecked)

Most of your fuel economy comes from your lean cruise cells which don't require a strong spark. The coilpack issues mainly occur under boost/load when the spark needs to be strong

Having said that splitfires are good for later on when you decide to start modding more

lots of talk of the AFM being faulty or having the right voltage but have you cleaned the AFM??? i dont think ive seen this mentioned yet...if so, sry i missed that. if your running an oil charged pod filter, they like to make AFM's dirty.

check for an air leak?? maybe in or near the TPS ( random idles are often this)

good luck...i couldnt imagine this sort of economy. the all wheel drive i guess would make it a bit more than a 2WD, but not that much...ouch. i get 400-500 out of my 33 GTST tank. 400 is with happy driving and happy laps. 500 is on the highway with my economy sponge installed :whistling: (i have seen 600km out of a tank)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...