Jump to content
SAU Community

Recommended Posts

So lately my gear box has been feeling less smooth than usual and I occasionally grind a gear when the clutch is all the way in. I just got near gearbox oil put in (a good one) and still I don't think it feels as good as I want it to. I hear about people putting an additive to reduce friction and give smoother changes. I know there are negatives to using engine oil additives but what about gearbox oil additives? Has anybody used something similar? What did you think of it?

Here is the item I'm talking about http://www.supercheapauto.com.au/online-store/products/Nulon-G70-Gearbox-Differential-Treatment-125g.aspx?pid=1397#Description

Dylan.

Link to comment
https://www.sau.com.au/forums/topic/379742-gearbox-oil-additive/
Share on other sites

People tend to have mixed results using these. There are also theories about the teflon additive glazing the synchros...not something you want to do as your gearbox will end up worse to drive than before. I'd be trying Redline Shockproof before putting one of these in...but it sounds like your gearbox needs some TLC AKA rebuild.

People tend to have mixed results using these. There are also theories about the teflon additive glazing the synchros...not something you want to do as your gearbox will end up worse to drive than before. I'd be trying Redline Shockproof before putting one of these in...but it sounds like your gearbox needs some TLC AKA rebuild.

pretty sure i read somewhere that the secret ingredient in redline shockproof is also teflon..

I put 2 tubes of that nulon shit in my box with castrol mineral oil, it didnt make any difference in everyday driving at all...however after a bit of spirited driving once the box is well warmed up it is really nice to shift..so yeah i dunno :unsure:

Found it..

REDLINE SHOCKPROOF There are concerns about using REDLINE SHOCKPROOF type gear oils inside manual transmissions. While this is truly an excellent product, it has been found that the heavy Teflon-like particles are quickly centrifuged out of the oil and will build up inside the center diff housing and around the synchronizers and inside of the gearshafts. After several oil changes this build up may block oiling passages inside the gearshafts that lubricate the needle bearings and can reduce the overall effectiveness of the synchronizers, leading to poor shift quality. Also this oil is has too high of a viscosity for winter use. Therefore we do not suggest using SHOCKPROOF in the transmission unless the transmission is to be serviced often or a dog box.

most here using it seem to not have any worries though..probably cause most service regularly..I'm def gunna try it next time..

Found it..

REDLINE SHOCKPROOF There are concerns about using REDLINE SHOCKPROOF type gear oils inside manual transmissions. While this is truly an excellent product, it has been found that the heavy Teflon-like particles are quickly centrifuged out of the oil and will build up inside the center diff housing and around the synchronizers and inside of the gearshafts. After several oil changes this build up may block oiling passages inside the gearshafts that lubricate the needle bearings and can reduce the overall effectiveness of the synchronizers, leading to poor shift quality. Also this oil is has too high of a viscosity for winter use. Therefore we do not suggest using SHOCKPROOF in the transmission unless the transmission is to be serviced often or a dog box.

most here using it seem to not have any worries though..probably cause most service regularly..I'm def gunna try it next time..

The winter part use, is that for Australia or the US? As our winters differ to the US's, which is why they may experience those problems

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...