Jump to content
SAU Community

Recommended Posts

Hi there, I'm an 18 year old P-Plater living in Queensland and lately I've become interested in purchasing my first car. I've been interested in Skylines for years and now I've found that owning one isn't as impossible as it once seemed. I'm not about to make a rash decision when it comes to purchasing a car, and for that reason I've been thoroughly researching just about everything I can get on Skylines which naturally lead me here. I've already searched the forums to answer a lot of my questions but I figured it would make sense to also ask a couple of my own. So, after looking around Carsales.com.au I'm leaning towards a GT-R34, but before I decide I need to voice a couple concerns I've had.

Fuel Economy: Not the biggest issue, if I have to pay more than an ugly small car to get from A to B that's not a major problem, from what I've read most people are getting 11 - 13L/100km. Most of those are going to be Turbos so my question is would a non-turbo use less fuel, and if so, how much? Would there be a noticeable difference in fuel consumption?

Aesthetics: Why I love the R34 in particular is the Z-tune front bumper, I realise that not a lot of cars would have a genuine Z-tune, but anything similar aesthetically is really what I'm looking for. The stock R34's with the basic front bumper look incredibly ugly to me. So should I just try and find a Skyline already fitted with a body kit? I'd imagine it'd be expensive to find a body kit and have it painted to match the car, even if I fitted it myself.

Things to watch out for: I'm aware that at 12 years old, the average Skyline isn't exactly new, even when kept in immaculate condition by the owner, what is likely to go wrong engine/drive train/brakes wise after I've bought a Skyline?

Thanks in advance, if I don't make sense in some parts it's because I'm still learning all I can about Skylines, and when they have so many iterations and modifications it gets a little confusing as to what name is referring to exactly which car/parts!

haha my bad. still, i'd say forget the gtr, depending on what state you are in, you'll be stuck with an GTS of some description. dw you can still get ztune style kits for em. you'll only have to shell out a kidney or two :P

Yeah thanks for the info guys! I don't have a keen eye for this GTR GTS GTT stuff yet so when I type in "GT-R34" I get god knows what. Basically I'm in it for a looker, performance would be nice, but it's not exactly affordable for the time being, especially being on P's with the non-turbo restriction.

^^^ agreed, thats how I took it.

If you want a car just for looks, then its all sweet, get yourself a 34GT. You seem to know a fair bit of info already, and have youre head on straight. Gathering that youre going to wait out the p-plate time until you get a high performance car.

Good luck and show pics when you get it.

Are you sure on your Ps, you seem a bit too sensible... Will be cheaper to buy one with a bar on it, but good luck.. Accept the fact that you will be driving a car that is slower than pretty much every Falcadore EF onwards, but seriously, how often will you be racing them anyway... I bought a Stagea because a GTR was out of the question and never regreted it, price insurance, and if you are still keen get searching!! And welcome aboard

Hah as it happens I did mean a R34 GT, I've seen just about every combination of letters involving R, 34 and GT over the last week so when it comes to describing exactly what I want it can get a little confusing! Yeah for now I just want a nice looking car to get around in, I've already read that R34's aren't the fastest car around, but then I won't be doing any racing (legally or otherwise) anyway.

A mate of mine just bought a black 34gt on his p's, the thing sounds good, looks good, handles nice and the interior on them are very comfy. Honestly, they are a nice car to drive, but arnt terribly fast at all and eat fuel like crazy, especially because it doesnt have the turbo to get it up to speed.

So should I just try and find a Skyline already fitted with a body kit?

You seem to be responsible & welcome!

The primary objective is to get a really good, rust-free and well cared for Skyline in the first place; then build on that as a base.

Take a mechanic/panel beater friend with you as you inspect + you'll have your own checklist (so you're focussed rather than caught up with the emotion).

Im a P plater aswell. I havent made the smartest descisions when it comes to cars but i can give you some advice.

1. I would steer clear of body kits, purely for the fact of we are in-experienced drivers, and 'kit' driving can take quite some getting used to. Fiberglass is very delicate compared to the stock plastic bumpers and can crack at the smallest of impacts. I had a full kit on my nissan exa, and after i got rid of it i swore i would not buy another kit until i was a crapload better at driving.

2. Find a car which is what i call 'granny spec'. Untouched, unmolested and not modded. Stock as a rock in other words. I have seen some dodgey backyard jobs and its not worth it. They may be harder to find but i swear to god its worth it.

3. This isnt really advice for finding a car, but more for when you get your car. When modding your car (im guessing that you will) keep the mods clean. Dont go and mount fully sick neons everywhere. Keep stuff tidy, maintain your car well. And if you feel that a job is over your head, dont do it anyway. Chances are you eff something else up which will lead to more $$$

4. Also keeping your car legal is also important. P plater + import = harrasment. I drive a R32 GTS and get pulled over now and then, and there is nothing better than knowing that the poilce cant defect you for anything.

Hope this helps, Mitch

Im a P plater aswell. I havent made the smartest descisions when it comes to cars but i can give you some advice.

1. I would steer clear of body kits, purely for the fact of we are in-experienced drivers, and 'kit' driving can take quite some getting used to. Fiberglass is very delicate compared to the stock plastic bumpers and can crack at the smallest of impacts. I had a full kit on my nissan exa, and after i got rid of it i swore i would not buy another kit until i was a crapload better at driving.

2. Find a car which is what i call 'granny spec'. Untouched, unmolested and not modded. Stock as a rock in other words. I have seen some dodgey backyard jobs and its not worth it. They may be harder to find but i swear to god its worth it.

3. This isnt really advice for finding a car, but more for when you get your car. When modding your car (im guessing that you will) keep the mods clean. Dont go and mount fully sick neons everywhere. Keep stuff tidy, maintain your car well. And if you feel that a job is over your head, dont do it anyway. Chances are you eff something else up which will lead to more $$

4. Also keeping your car legal is also important. P plater + import = harrasment. I drive a R32 GTS and get pulled over now and then, and there is nothing better than knowing that the poilce cant defect you for anything.

Hope this helps, Mitch

+1. Listen to this guy.

Hah as it happens I did mean a R34 GT, I've seen just about every combination of letters involving R, 34 and GT over the last week so when it comes to describing exactly what I want it can get a little confusing! Yeah for now I just want a nice looking car to get around in, I've already read that R34's aren't the fastest car around, but then I won't be doing any racing (legally or otherwise) anyway.

this is true. expect to get beaten by commodores and falcons if you decide to give it a squirt off from the traffic lights and they do the same

Not sure if troll... or if law of averages finally lead to one sensible P plater...

Everyone in this thread has had excellent points so far.

I just want to throw a wrench into the works for you mate. R34 at 18 years of age, turbo or not = raped by insurance companies. Have you priced up insurance yet? Make sure you go quote crazy man.

If on the off chance they are going to sting you for a left net and your kidney, it may be well worth your while looking at an Australian delivered S15. Now, yes I know it's not a 34, but it's the 34 of the Silvias, and a LOT of people over the years have tossed up between S15s and R34s. They're still a great looking and sounding car, and provide you with THREE bonuses over an R34. These are they:

1. 4 cylinder = cheaper rego

2. Australian delivered means cheaper insurance than an import.

3. A bit smaller than a 34 (good for when you start out driving). I don't know if you've driven or even sat in a Skyline... but they aren't small cars by any stretch of the imagination. There will be less "...can I make that?" moments in an S15 in carparks as they're a bit more nimble at low speeds too... Skylines are fat disgusting slugs in carparks/3 point turns or any other slow speed manoeuvres.

Ultimately up to you. Just thought you might like a dose of my hindsight of having a tank (XD) for one of my first cars.

Edited by Isola

Get it and throw a massive turbo on it, screw the P Plate laws they're just stupid. Believe me with a turbo the girls will throw themselves at you. Try to hide it in the trunk or somewhere under the seats or just run a 1000 shot of NOS like in 2 Fast 2 Furious, don't forget to scream "Gotta go dogg" when you school a "nOOb". Stickers and a subwoofer are must haves, stickers will give 20-50hp depending on which ones and how big they are. A subwoofer will get the chicks attention. If a cop tries to harass you remind him that you're a G wid a Skyline and that you're "connected". Play the music below and you will be DK.

http://www.youtube.com/watch?v=mR8KRBWKIoI

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...