Jump to content
SAU Community

Recommended Posts

Hey guyz

Im currently 19 and

Well i really want an R32 GTS-T however i know coz its imported and all that insurance is a killa

However i kinda like the 200sx (s14) and i know there not an imported model so would it make insurance a little cheaper??

Would anybody know??

Ps Which car would u recommend?? S14 or R32

Thanks

Joe!

Link to comment
https://www.sau.com.au/forums/topic/38077-200sx-s14-or-r32-gts-t/
Share on other sites

Whatever you do... Don't buy a SKYLINE!!!!!!!!!

j/k

series 2 looks more agressive, i think thats about it. It came in 97 and 98. Personally i like the series 1.

The r32's a mad car, fun to drive, great on boost, but sluggish off boost. S14 is a bit better off boost, but it's more of a street car in that it lacks the extra sporty benefits of the r32 like stock boost and oil pressure guage, less adjustability in the seats and steering column, and a different suspension setup.

both good cars, S14 is newer, slightly safer option with service books, parts, etc..

Skylines go hard

R32 is more of a sports car, also a 6 cycl, so sounds nice are tough. I havent driven a stock one tho.

S14 is an aussie made car, that surprises a few people. Have a beautiful exhaust note on boost. The luxury model has a sunroof and airbag(s?)

I believe insurance will be the same for both cars, coz they are both single turbo coupes.

Id take the R32, or if not id take a S14a, they are worth saving a little bit longer for!

Flaps, not sure where you got that info from, but if it is correct, that did suprise me, got any links to back it up???

This may also suprise a few people.. Insurance on a R32 GTS-t about $2400 at 30% NCB through Justcar. Insurance on S14 200sx ~$4000 at 30% NCB through Justcar. I can't explain it, but going by that, your theory on insurance goes out the window ;) Considering the S14 costs ~$18k and the R32 ~$14k i know which one I would want... but the S14 is dead sexy and the SR20DET is a grat engine too.

In the end, it's personal choice.

To add: I don't think the S14 is an australian made car... It is a silvia at heart, rebadged 200sx, and in Japan came in 3 variations J's Q's and K's just like the S13. Australia had 3 models also, however unlike the JDM, all ours were turbo. Base model was Limited, Sports model had a few things like A/C and a rear spoiler, and the Luxury model came with a sunroof etc.

Well ive had s 32 skylines and just bought a series 2 s14 (97 with the differant headlights, taillights and badge) the s14 seems more fun to drive at this stage with much the same power as my first 32. Australian made??? dont think so. Also the cops dont seem to look at the s14 as much as the skyline as they were AUSTRALIAN DELIVERED, not ausie made. Insurance IS cheeper and so is rego.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...