Jump to content
SAU Community

First Race Meet On The New Eastern Creek This Weekend

Duncan

By Duncan,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Duncan Grand Master

Duncan

Posted
Posted

Well the NSW State Champs are on at Eastern Creek this weekend - but the twist is that it is the first race meet on the new, "north" circuit.

$9M of taxpayer funding later, the ARDC can now hire out the track in 2 halves. This weekend's state champs are on the short track but the same price as when the full track used to be used.

The quickest cars are doing the lap in about 1min which is around 2/3 the length of the old track, it has also removed turns 4,5,6,7,8 and changed 9 to a kink.

Results are here: http://www.natsoft.com.au/cgi-bin/results.cgi?23/10/2011.ECNT

:down: from me.....did anyne race there today, and what did they think?

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

benm Grand Master

benm

Posted
Posted

Gaytube, dunno how to embed videos.

I don't agree with the entry cost being the same for half the track although standing at the new turn 4 for 4hrs today it is quite an exciting little section that turns the whole north circuit layout into more of a horsepower track than EC already was. Very bumpy on the entry to turn 4, take too much curb and it will bounce the car around and make it difficult to get the right line into turn 5 which then effects top end speed at (the new) turn 6 kink.

Duncan Grand Master

Duncan

Posted
  • Author
Posted

anyone found onboard video of a lap?

I was hoping there would be some by now, or feedback from someone who has run the new track

.....it is quite an exciting little section that turns the whole north circuit layout into more of a horsepower track than EC already was. Very bumpy on the entry to turn 4, take too much curb and it will bounce the car around and make it difficult to get the right line into turn 5 which then effects top end speed at (the new) turn 6 kink.

That's exactly how I see it without having tried it yet. It increases the worst thing about the track (dragstrip/power track) while removing some of the challenging corners. In a soft car like mine I guess the new turn 4/5/6 complex will be easy to cut, we approach turn 4 in high 3rd or low 4th gear so we aren't as fast or as stiffly sprung as the radicals in the video. I bet the IPRA guys were cutting like crazy.

The track hasn't been ruined, its just gives another layout option (just like Oran Park had).

Well, to me, Oran Park South was one of the few track that was not really worth running on. I turned down plenty of chance to run there, the OP GP circuit was a totally different matter, its the best track I've run on.

And it at least had the challenges of suttons and the flip flop, EC North has nothing like that (turn 1 is ho-hum once you work out how fast to take it, 2 is just slow, 10/11/12 is the only fun remaining)

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted

could be worse - look at QR... their most common short track leaves just 3 proper corners. Mind you, they only have 6 to start with. The short track sections are nonsence flip-floppy things through spoon drains.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...