Jump to content
SAU Community

Recommended Posts

Ok I'm going out to the creek on monday so what's the go?

1. Helmet?

2. Long sleeve shirt? Why?

3. Put cheap tyres on.

4. I have an auto/tiptronic. Will I have tranny overheating problems? How do I know if it's getting bad? Just keep an eye on my engine oil temp gauge I guess.

5. It's twenty minute runs I think. Much waiting in between?

6. Anything else I should know?

Link to comment
https://www.sau.com.au/forums/topic/38118-my-first-track-day-what-do-i-need/
Share on other sites

1. required, must comply with AS 1698 or equivalent.

2. "neck to wrist to ankle" non flammable clothing, driving suit recommended, shoes must also be non-flammable . i.e. sneakers made of synthetic materials are technically not allowed.

3. heh

4. should be OK, you won't be pushing it that hard I would expect.

5. if there's 3 groups then 40 minutes in between (60/3=20) :(, if there's 4 groups Dave usually runs 15 minute sessions

6. BLEED YOUR BRAKES!!!!!!!!!!! This is the most overlooked thing for track preparation. Nothing worse than having the pedal go to the floor on the 3rd lap because of all the grungy sh1t in your lines and calipers. :D

Check all fluid levels, tyre pressures, wheel nuts, everything!

Contrary to popular belief Frank Williams does NOT recruit at drive days so stick to your limits and you'll have a great time and drive home in an unbent car.

oh and have fun :)

Contrary to popular belief Frank Williams does NOT recruit at drive days so stick to your limits and you'll have a great time and drive home in an unbent car.

Damn! I all that hard work went to nothing. I really thought I had a chance with Montoya leaving. :)

Keep an eye on your temp guage and you should be good.

If it's your first time out there, get one of the regular trackday hoons to show you the lines. What ever you do, don't get Fatz to show you the lines. He drives on some funny lines that bloke :D

Contrary to popular belief Frank Williams does NOT recruit at drive days so stick to your limits and you'll have a great time and drive home in an unbent car.
What the... ? Wish you had told me this last time I was at the Creek. Would have saved me about $2,500 in brake repairs :D

Definitely bleed your brakes with brand new DOT5.1 Brake fluid (about $100 inc labour at your local brake mechanic).

I'd also highly recommend asking either a "Driving Instructor" (their are usually 2-3 at the trackdays) or someone whom has been to 2-3 trackdays before to passenger around with you for the first session (or 2). You don't need 1000's of hp to cut a quick lap... you need good lines and smooth throttle/braking. No point trying to put Schumacher out of a job on your first outing, just work on getting the lines right and learning the corners.

When the checkered flag is shown reduce your speed to about 60-80 in 4th gear (for the cool down lap) to help all your temperatures drop. When you make it back to the pits drive all the way out to the main road and back before parking in the pit garage. This will allow your brakes and engine oil etc to cool down. When you arrive back at your garage leave your handbrake off and just throw something behind a wheel. Keep your bonnet raised until your next session is due (about 40mins).

Make sure you remove anything loose from your car; Headunit, Center Console, Glove Box, sub box, spare tyre, jack etc.

Contrary to popular belief Frank Williams does NOT recruit at drive days ....

What the?

I've got one to add :/

Don't go out there trying to set a quick time! Its your first day, get used to how the car reacts on the track, build speed gradually, that way you'll bring your car home straight and learn a heap about driving....

Bob, good to see you're still at it.:P (I was in the purple 180SX at the Skylines Australia skidpan day a while back).

I'd say:

Take some concentrated coolant and distilled water.

Get some cotton gardening gloves if you're going to change tyres. Take some wet-wipes as well. It sucks getting grease and stuff on your steering wheel (as well as being unsafe).

Buy some racing gloves. You only have to get blisters once before it seems like a good idea.

Take a look under your car before a session to see if anything is leaking out after the last session (I noticed burst caster rod bushings this way).

Make sure your battery is secure, since scrutes always check this first.

Take out your floormats.

benm is right. Make sure you let your brakes and other stuff actually cool down on the cooldown lap. I just had my front rotors machined recently after they warped from a trackday at Wakefield because I didn't let them cool down.

Ask people stuff. I asked a lady who drives an awesome (and loud) dark blue RX-7 to show me the right line on the circuit map at Wakefield, and the next session, my average lap time went down almost half a second.

Don't you also need a secondary bonnet release? That's what i was told anyway??

any cams event will require a L2S license, secondary bonnet tie down and a fire extinguisher.

The track days run by motoconcepts, unique autosports, wakefield park etc only require roadworthy car, helmet and long clothes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...