Jump to content
SAU Community

M35 Screen Flicker

MOUTH

By MOUTH,
in Four Door Family & Wagoneers

 Share

Recommended Posts

MOUTH Collaborator

MOUTH

Posted
Posted (edited)

So I have pal to ntsc converter (when a pal ps3 is hooked to the screen its black and white/wrong etc), a 1000w inverter and a spare ps3 (missus won in a competition). I was thinking for long drives etc for mates to watch vids/play games etc with 120gb of video/audio it would be the goods......So I hooked it all up in the back (above the spare wheel in that compartment) and I get a screen flicker thats quite bad (audio is fine). I have old thick gauge wirring that was to an amp in the back straight powered to the inverter and have tried hooking it straight from the battery (20 cm leads) to eliminate the wirring side of things.

Thought it must be interference with the inverter, so hooked up an extension cord to mains power and I still get the flicker :blink: .

When I have my creative mp4 player hooked up to the screen I have no issues at all (no flicker etc) video is ok......

So has anyone had a ps3/xbox or what ever hooked up to there M35 screen? Or has anyone had screen flicker issues with there M35?

I havent played around with it for long and my searches on the net don't come up with any solid info, any ideas from the electronics gurus on here?

Edited by MOUTH
Link to comment
https://www.sau.com.au/forums/topic/381328-m35-screen-flicker/
Share on other sites
MOUTH Collaborator

MOUTH

Posted
  • Author
Posted (edited)

i get flicker on the WD Live media player. but didnt with the new asuka tv tuner

there is probably interference in the car, use sheilded coaxial cabling.........

Hey mate I take it you were using an inverter to use the wd player? Last night I tried a xbox360 and ps2 all the same...... and then tried another screen I had laying around and it was fine. So its something to do with the factory screen and some interference between with ps3/pal to ntsc convertor and and the screen.

Edited by MOUTH
Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

I remembered my screen use to get a bit of green waves and loose colour when then Vpp is to high. The screen likes a peak to peak voltage of about 1 volt. So if you measure the RCA plug from the shileld to the core on DC it should be around 1 volt when turned on.

I had a device that put out 2-3 volts peak to peak and the screen didnt like it.

In the specifications for the PS3 it should tell you the Vpp

Or I agree with the possible Hz difference between PAL and NTSC but saying that I would think the converter would sort that out otherwise its not really converting PAL to NTSC

Was the other screen you tried a NTSC or PAL screen and did you have the converter when you used the other screen if so it cant be the converter.

If you get really stuck you can bring it out and Ill have a look

MOUTH Collaborator

MOUTH

Posted
  • Author
Posted

I remembered my screen use to get a bit of green waves and loose colour when then Vpp is to high. The screen likes a peak to peak voltage of about 1 volt. So if you measure the RCA plug from the shileld to the core on DC it should be around 1 volt when turned on.

I had a device that put out 2-3 volts peak to peak and the screen didnt like it.

In the specifications for the PS3 it should tell you the Vpp

Or I agree with the possible Hz difference between PAL and NTSC but saying that I would think the converter would sort that out otherwise its not really converting PAL to NTSC

Was the other screen you tried a NTSC or PAL screen and did you have the converter when you used the other screen if so it cant be the converter.

If you get really stuck you can bring it out and Ill have a look

cheers brad will check it out

MOUTH Collaborator

MOUTH

Posted
  • Author
Posted (edited)

dude, why are you using a PAL to NTSC converter?

the PS3 will output NTSC from the composite video cables......

Tried this in the first place, black and white and screen flicker, with the convertor I get color.........and screen flicker....On the ps3 website it also says PAL for composite output (obviously if your in a pal region)

http://manuals.plays...ideooutput.html

Now reading this also I have just seen that it will only out put 576i through Pal composite..... whats the max that our ntsc screens do? 480i? Then this maybe the problem?

Edited by MOUTH
zei20l Grand Master

zei20l

Posted
Posted

its not even 480! its analogue. with the 'Leon' tuner i got a perfect picture on the 576i/p setting, the 480p setting wasnt quite right.

just muck around with the PS3, i swear i can change mine to NTSC in the setup menu - of the PS3

MOUTH Collaborator

MOUTH

Posted
  • Author
Posted

its not even 480! its analogue. with the 'Leon' tuner i got a perfect picture on the 576i/p setting, the 480p setting wasnt quite right.

just muck around with the PS3, i swear i can change mine to NTSC in the setup menu - of the PS3

Sorry didn't even think about the digital-analog (480etc).........:unsure:

99.9% sure I cant change it to ntsc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...